條件(也叫觸發器)用來在效果發生時進行判定。當一個觸發器判定為滿足條件時,效果就會實施,否則就會停止。一些觸發器,包括默認的AND觸發器,允許相互嵌套以創建更複雜的表達。
任意作用域
這部分內容可能已不適合當前版本,最後更新於1.9。 |
這些觸發器不依賴任何特定的作用域。
名稱 | 參數類型 | 樣例 | 描述 | 注釋 | 加入的版本 |
---|---|---|---|---|---|
always | <bool> 布爾型。 |
always = yes |
無論什麼條件下都是存在的 | 1.0 | |
AND | 觸發器。 | AND = { original_tag = GER has_stability > 0.5 } |
如果下面任何一個條件是不滿足的,則不觸發,即需要滿足所有條件 | 幾乎所有需要觸發器的地方都使用隱式AND觸發器。 | 1.0 |
OR | 觸發器。 | OR = { original_tag = ENG original_tag = USA } |
只需要滿足其中一個條件就可以觸發。在檢測到第一個滿足條件後停止繼續檢測 | 1.0 | |
NOT | 觸發器。 | NOT = { has_stability > 0.5 has_war_support > 0.5 } |
下列沒有任何一個條件被滿足即可 | 1.0 | |
count_triggers | amount = <int> 觸發器。 |
count_triggers = { amount = 2 10 = { state_population = 100000 } 11 = { state_population = 100000 } 12 = { state_population = 100000 } } |
對下面的所有條件進行計算(不滿足=0.滿足=1),如果和等於amount 就可以觸發
|
1.5 | |
if | limit = <AND-trigger> 條件。
|
if = { limit = { has_dlc = "Poland: United and Ready" } has_political_power > 100 else = { has_war_support > 0.5 } } |
首先,limit是一個AND的觸發器,也就是其中的所有條件都需要滿足,如果limit中的內容沒有滿足,就開始檢測else_if,直到else最後這個觸發器(除非你沒有寫)。這其中的每一個觸發器只要有一個觸發器中的內容全部滿足就會觸發 | else_if 和else 也可以直接跟在if觸發器的後面,而不是放在裡面。
|
1.0 |
hidden_trigger | 觸發器。 | hidden_trigger = { country_exists = GER } |
與AND觸發器類似,但是不會出現在提示條中。 | ||
custom_trigger_tooltip | tooltip = <string> 觸發器。 |
custom_trigger_tooltip = { tooltip = sunrise_invasion_tt any_state = { is_owned_by = JAP is_on_continent = europe is_coastal = yes } } |
和AND觸發器類似,但是提示文字會顯示tooltip 的內容。在樣例中是sunrise_invasion_tt (在本地化文件中定義)。
|
||
has_global_flag | <string> 要檢查的flag。 |
has_global_flag = my_flag |
檢查某一特定flag是否已被設定。 | 1.0 | |
has_global_flag | flag = <string> 要檢查的flag。
|
has_global_flag = { flag = my_flag days > 30 date > 1936.6.1 value > 0 } |
比較特定flag上次設定的日期,設定後存在的天數,和/或flag值。 | 如果沒有設定,值的比較默認為>0 。value 限制在-32768和32767之間。
|
1.0 |
has_dlc | <string> 要檢查的DLC名。 |
has_dlc = "Waking the Tiger" |
檢查特定DLC是否已開啟。 | 1.0 | |
has_start_date | <date> 要檢查的日期。 |
has_start_date > 1950.01.01 |
檢查特定日期是否是當前遊戲的開始日期。 | 必須使用>或<運算符。 | 1.0 |
date | <date> 要檢查的日期。 |
date < 1950.01.01 |
檢查指定的日期是否與當前的日期相對應。 | 必須使用>或<運算符。 | 1.0 |
difficulty | <int> 難度值。 |
difficulty > 0 |
檢查指定的難度是否與當前的難度相對應。 | 必須使用>或<運算符。 | 1.0 |
has_any_custom_difficulty_setting | <bool> 布爾型。 |
has_any_custom_difficulty_setting = yes |
檢查任何國家是否有自定義難度選項正在使用。 | 1.0 | |
has_custom_difficulty_setting | <string> 要檢查的設置。 |
has_custom_difficulty_setting = custom_diff_strong_sov |
1.0 | ||
game_rules_allow_achievements | <bool> 布爾型。 |
game_rules_allow_achievements = yes |
檢查是否所有使用中的遊戲規則允許完成成就。 | 1.9 | |
country_exists | <scope> / <variable> 要檢查的國家。 |
country_exists = GER |
檢查特定國家目前是否在遊戲中存在。 | 1.0 | |
is_ironman | <bool> 布爾型。 |
is_ironman = yes |
檢查當前遊戲是否處於鐵人模式。 | 1.0 | |
is_historical_focus_on | <bool> 布爾型。 |
is_historical_focus_on = yes |
檢查當前遊戲是否處於歷史國策開啟的模式。 | 1.0 | |
is_tutorial | <bool> 布爾型。 |
is_tutorial = yes |
檢查當前遊戲是否處於教程模式。 | 1.0 | |
is_debug | <bool> 布爾型。 |
is_debug = yes |
檢查當前遊戲是否處於debug模式(用-debug模式啟動遊戲)。 | 1.9 | |
threat | <float> 要檢查的值。 |
threat > 0.5 |
檢查世界緊張度是否達到某個特定的值。 | 必須使用>或<運算符。 | 1.0 |
has_game_rule | <string> 要檢查的遊戲規則
|
has_game_rule = { rule = GER_can_remilitarize_rhineland option = yes } |
檢查一個遊戲規則是否設定成特定的選項。 | 1.5 |
國家作用域
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Can be used in country scope.
總覽
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
exists | <bool> 是否存在 |
exists = yes |
檢查當前範圍是否存在於遊戲中 | 1.0 | |
tag | <scope> / <variable> 指向某個國家 |
tag = GER tag = var:my_country |
檢查當前範圍是否為這個國家 | 1.0 | |
original_tag | <scope> / <variable> 指向某個國家 |
original_tag = GER original_tag = var:my_country |
檢查當前範圍是否曾經是這個國家 | 1.0 | |
is_ai | <bool> 是否為AI |
is_ai = yes |
檢查當前範圍是否為AI | 1.0 | |
has_country_flag | <string> The flag to check. |
has_country_flag = my_flag |
Checks if the current scope has the specified flag. | 1.0 | |
has_country_flag | flag = <string> The flag to check.
|
has_country_flag = { flag = my_flag days > 30 date > 1936.6.1 value > 0 } |
Compares the specified flag's last set date, days since last set, and/or value. | If not set, the value comparison is >0 . value is limited between -32768 and 32767.
|
1.0 |
has_cosmetic_tag(擁有顯示tag) | <string> 指向某個顯示tag(對應效果中的更改顯示tag) |
has_cosmetic_tag = SOV_custom |
Checks if the current scope has the specified cosmetic tag active. | 1.5 | |
has_decision | <string> 檢查決議 |
has_decision = my_decision |
檢查當前範圍內指定決議是否被激活 | 1.5 | |
has_dynamic_modifier | modifier = <string> The dynamic_modifier to check.
|
has_dynamic_modifier = { modifier = my_dynamic_modifier scope = GER } |
Checks if the current scope has the specified dynamic modifier activated. | 1.6 | |
has_active_mission | <string> The mission to check. |
has_active_mission = my_mission |
Checks if the current scope has the specified mission active. | 1.5 | |
has_focus_tree | <string> The focus tree to check. |
has_focus_tree = soviet_tree |
Checks if the current scope has the specified focus tree. | 1.3 | |
has_completed_focus(完成國策) | <string> 指定某個國策是否完成 |
has_completed_focus = my_focus |
檢查當前指定國策是否完成 | 1.0 | |
focus_progress | focus = <string> 用於檢查的國策
|
focus_progress = { focus = my_focus progress > 0.5 } |
檢查該國策是否已經完成了當前範圍的指定百分比 | Must use either > or < operators for progress. | 1.0 |
政治
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_political_power | <float> The amount to check for. |
has_political_power > 100 |
Checks if the current scope has the specified amount of political power. | Must use either > or < operators. | 1.0 |
political_power_daily | <float> / <variable> The amount to check for. |
political_power_daily > 1 |
Checks if the current scope has the specified amount of daily political power gain. | Must use either > or < operators. | 1.5 |
political_power_growth | <float> / <variable> The amount to check for. |
political_power_growth > 1 |
Checks if the current scope has the specified amount of daily political power gain. | Must use either > or < operators. | 1.5 |
command_power | <float> / <variable> The amount to check for. |
command_power > 1 |
Checks if the current scope has the specified amount of command power. | Must use either > or < operators. | 1.5 |
command_power_daily | <float> / <variable> The amount to check for. |
command_power_daily > 1 |
Checks if the current scope has the specified amount of daily command power gain. | Must use either > or < operators. | 1.5 |
has_war_support | <float> / <variable> The amount to check for. |
has_war_support > 0.5 |
Checks if the current scope has the specified percentage of War Support. | Must use either > or < operators. | 1.5 |
has_stability | <float> / <variable> The amount to check for. |
has_stability > 0.5 |
Checks if the current scope has the specified percentage of Stability. | Must use either > or < operators. | 1.5 |
<ideology> | <ideology> = <float> The amount of the ideology to check for. |
fascism > 0.5 |
Checks if the current scope has the specified ideology above the specified amount. | 1.0 | |
has_government | <string> The ideology to check for. |
has_government = fascism |
Checks if the current scope ruling party is the specified ideology. | 1.0 | |
has_elections | <bool> Boolean. |
has_elections = yes |
Checks if the current scope holds elections. | 1.0 | |
is_staging_coup | <bool> Boolean. |
is_staging_coup = yes |
Checks if the current scope is staging a coup. | 1.3 | |
is_target_of_coup | <bool> Boolean. |
is_target_of_coup = yes |
Checks if the current scope is the target of a coup. | 1.0 | |
has_civil_war | <bool> Boolean. |
has_civil_war = yes |
Checks if the current scope has a civil war active. | 1.0 | |
civilwar_target | <scope> The target country. |
civilwar_target = GER |
Checks if the specified country is a target of a civil war. | 1.0 | |
has_manpower_for_recruit_change_to | value = <float> The amount to check for.
|
has_manpower_for_recruit_change_to = { value > 0.05 group = mobilization_laws } |
Checks if the current scope has the specified amount of manpower for changing the specified idea group. | Must use either > or < operators as = operator checks for the exact value | 1.0 |
has_country_leader | id = <int> The id to check for. Optional.
|
has_country_leader = { id = 10 } has_country_leader = { name = "John Smith" ruling_only = yes } |
Checks if the current scope has the specified country leader. | 1.3 | |
has_rule | <string> The rule to check for. |
has_rule = { can_create_factions } |
Checks if the current scope has the specified country rule. | 1.6 |
建築
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
<building> | <building> = <int> The amount of the specified building to to check for. |
arms_factory > 10 |
Checks if the current scope has the specified amount of the specified building. | Must use either > or < operators. | 1.0 |
num_of_military_factories | <int> The amount to check for. |
num_of_military_factories > 10 |
Checks if the current scope has the specified amount of military factories. | Must use either > or < operators. | 1.0 |
num_of_civilian_factories | <int> The amount to check for. |
num_of_civilian_factories > 10 |
Checks if the current scope has the specified amount of civilian factories. | Must use either > or < operators. | 1.0 |
num_of_naval_factories | <int> The amount to check for. |
num_of_naval_factories > 10 |
Checks if the current scope has the specified amount of dockyards. | Must use either > or < operators. | 1.0 |
num_of_available_military_factories | <int> The amount to check for. |
num_of_available_military_factories > 10 |
Checks if the current scope has the specified amount of available military factories. | Must use either > or < operators. | 1.0 |
num_of_available_civilian_factories | <int> The amount to check for. |
num_of_available_civilian_factories > 10 |
Checks if the current scope has the specified amount of available civilian factories. | Must use either > or < operators. | 1.0 |
num_of_available_naval_factories | <int> The amount to check for. |
num_of_available_naval_factories > 10 |
Checks if the current scope has the specified amount of available dockyards. | Must use either > or < operators. | 1.0 |
num_of_factories | <int> The amount to check for. |
num_of_factories > 10 |
Checks if the current scope has the specified amount of military, civilian or dockyard factories. | Must use either > or < operators. | 1.0 |
num_of_civilian_factories_available_for_projects | <int> The amount to check for. |
num_of_civilian_factories_available_for_projects > 10 |
Checks if the current scope has the specified amount of civilian factories usable for projects. | Must use either > or < operators. | 1.5 |
ic_ratio | tag = <scope> The country to check.
|
ic_ratio = { tag = GER ratio > 0.5 } |
Checks if the current scope has the specified ratio of factories with the target country. | Must use either > or < operators for ratio. | 1.0 |
has_damaged_buildings | <bool> Boolean. |
has_damaged_buildings = yes |
Checks if the current scope has any damanged buildings in their states. | 1.0 | |
has_built | type = <building> The building to check for.
|
has_built = { type = arms_factory value > 10 } |
Checks if the current scope has built the specified building the specified number of times. | Must use either > or < operators for value. | 1.0 |
科技
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_tech | <string> The technology to check for. |
has_tech = my_technology |
Checks if the current scope has the specified technology. | 1.0 | |
is_researching_technology | <string> The technology to check for. |
is_researching_technology = my_tech |
Checks if the current scope is currently researching the specified technology. | 1.0 | |
can_research | <string> The technology to check for. |
can_research = my_tech |
Checks if the current scope can start researching the specified technology. | 1.0 | |
original_research_slots | <int> The amount to check for. |
original_research_slots > 3 |
Checks if the current scope had the specified amount of slots at game start. | Must use either > or < operators. | 1.0 |
amount_research_slots | <int> The amount to check for. |
amount_research_slots > 3 |
Checks if the current scope has the specified amount of research slots. | Must use either > or < operators. | 1.3 |
is_in_tech_sharing_group | <string> The group to check for. |
is_in_tech_sharing_group = us_research |
Checks if the current scope is in the specified technology sharing group. | 1.3 | |
num_tech_sharing_groups | <int> The amount to check for. |
num_tech_sharing_groups > 3 |
Checks if the current scope is in the specified amount of technology sharing groups. | Must use either > or < operators. | 1.3 |
has_tech_bonus | technology = <string> The technology to check for. Optional.
|
has_tech_bonus = { technology = my_tech has_tech_bonus = { category = my_category } |
Checks if the current scope has a technology bonus in the specified category, or for the specific technology. | 1.3 | |
land_doctrine_level | <int> The amount to check for. |
land_doctrine_level > 2 |
Checks if the current scope has the specified amount of land doctrine technologies. | Must use either > or < operators. | 1.0 |
國家精神
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_idea | <string> The idea to check for. |
has_idea = my_idea |
Checks if the current scope has the specified idea. | ||
has_idea_with_trait | <string> The trait to check for. |
has_idea_with_trait = my_trait |
Checks if the current scope has any ideas with the specified trait. | 1.0 | |
has_available_idea_with_traits | idea = <string> The trait to check for.
|
has_available_idea_with_traits = { idea = my_trait limit = 1 } |
Checks if the current scope has the specified amount of ideas with the specified trait. | 1.0 | |
amount_taken_ideas | amount = <int> The amount to check for.
|
amount_taken_ideas = { amount > 3 slots = { political_advisor } } |
Checks if the current scope has the specified amount of ideas of the specified slot type. | Slots types are found in /Hearts of Iron IV/common/idea_tags/*.txt. | 1.0 |
外交
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
is_major | <bool> Boolean. |
is_major = yes |
Checks if the current scope is considered a Major. | 1.0 | |
is_in_faction_with | <scope> / <variable> The country to check for. |
is_in_faction_with = GER is_in_faction_with = var:country |
Checks if the current scope is in a faction with the specified country. | 1.0 | |
is_in_faction | <bool> Boolean. |
is_in_faction = yes |
Checks if the current scope is in a faction. | 1.0 | |
is_faction_leader | <bool> Boolean. |
is_faction_leader = yes |
Checks if the current scope is the leader of a faction. | 1.0 | |
num_faction_members | <int> The amount to check for. |
num_faction_members > 1 |
Checks if the faction of the current scope has the specified amount of members. | Must use either > or < operators. | 1.0 |
has_non_aggression_pact_with | <scope> / <variable> The country to check for. |
has_non_aggression_pact_with = GER |
Checks if the current scope has a non-aggression pact with the specified country. | 1.0 | |
is_guaranteed_by | <scope> / <variable> The country to check for. |
is_guaranteed_by = GER |
Checks if the current scope has been guaranteed by the specified country. | 1.0 | |
has_guaranteed | <scope> / <variable> The country to check for. |
has_guaranteed = GER |
Checks if the current scope has guaranteed the specified country. | 1.0 | |
has_military_access_to | <scope> / <variable> The country to check for. |
has_military_access_to = GER |
Checks if the current scope has military access to the specified country. | 1.0 | |
gives_military_access_to | <scope> / <variable> The country to check for. |
gives_military_access_to = GER |
Checks if the current scope gives military to the specified country. | 1.0 | |
is_neighbor_of | <scope> / <variable> The country to check for. |
is_neighbor_of = GER |
Checks if the current scope is a neighbor of the specified country. | 1.0 | |
is_owner_neighbor_of | <scope> / <variable> The country to check for. |
is_owner_neighbor_of = GER |
Checks if the current scope is a neighbor of the specified country with their core territory only. | 1.0 | |
is_puppet_of(被某國傀儡) | <scope> / <variable> 指向傀儡該國的國家 |
is_puppet_of = GER |
Checks if the current scope is a puppet of the specified country. | 1.0 | |
is_subject_of | <scope> / <variable> The country to check for. |
is_subject_of = GER |
Checks if the current scope is a subject of the specified scope. | 1.0 | |
is_puppet(是否被傀儡) | <bool> Boolean. |
is_puppet = yes |
Returns true if the current country has an autonomy level with is_puppet = yes , false otherwise.
|
1.0 | |
is_subject | <bool> Boolean. |
is_subject = yes |
Checks if the current scope is a subject. | 1.0 | |
num_subjects | <int> The amount to check for. |
num_subjects > 3 |
Checks if the current scope has the specified amount of subjects. | Must use either > or < operators. | 1.3 |
has_autonomy_state | <string> The autonomy state to check for. |
has_autonomy_state = autonomy_dominion |
Checks if the current scope is in the specified autonomous state. | 1.0 | |
compare_autonomy_state | <string> The autonomy state to check for. |
compare_autonomy_state > autonomy_dominion |
Checks if the current scope autonomy state is less or greater than the specified autonomy state. | Must use either > or < operators. | 1.0 |
compare_autonomy_progress_ratio | <float> The amount to check for. |
compare_autonomy_progress_ratio > 0.5 |
Checks if the current scope autonomy progress is at the specified ratio. | Must use either > or < operators. | 1.3 |
has_opinion_modifier | <string> The opinion modifier to check for. |
has_opinion_modifier = my_modifier |
Checks if the current scope has the specified opinion modifier. | 1.0 | |
has_opinion | target = <scope> The country to check for.
|
has_opinion = { target = GER value = 100 } |
Checks if the current scope has the specified opinion with the specified country. | Must use either > or < operators. | 1.0 |
has_relation_modifier | target = <scope> The country to check for.
|
has_relation_modifier = { target = GER modifier = my_modifier } |
Checks if the current scope has the specified relation modifier with the specified country. | 1.0 | |
all_allied_country | triggers | all_allied_country = { has_stability > 0.8 } |
Returns true if THIS is in a faction where all other countries fulfill the sub-triggers; false otherwise. Evaluation stops early if any ally fails the check. | Within the trigger PREV is the country doing the check and THIS is the ally. | |
any_allied_country | triggers | any_allied_country = { has_stability > 0.8 } |
Returns true if THIS is in a faction where at least one other country fulfills the sub-triggers; false otherwise. Evaluation stops early if any ally passes the check. | Within the trigger PREV is the country doing the check and THIS is the ally. | |
any_neighbor_country | triggers | any_neighbor_country = { has_stability > 0.8 } |
Returns true if at least one other country that controls a province adjacent to a province controlled by THIS fulfills the sub-triggers; false otherwise. Evaluation stops early if any neighbor passes the check. | Within the trigger PREV is the country doing the check and THIS is the neighbor. | |
all_neighbor_country | triggers | all_neighbor_country = { has_stability > 0.8 } |
Returns false if any other country that controls a province adjacent to a province controlled by THIS fails the sub-triggers; true otherwise. Evaluation stops early if any neighbor fails the check. | Within the trigger PREV is the country doing the check and THIS is the neighbor. The list of neighbor countries is pre-calculated. | |
any_home_area_neighbor_country | triggers | any_home_area_neighbor_country = { has_stability > 0.8 } |
Returns true if THIS has a home area and at least one country controlling an adjacent area to it fulfills the sub-triggers; false otherwise. The home area is the largest contiguous area controlled by THIS that contains at least one province of its capital state. Evaluation stops early if any neighbor passes the check. | Within the trigger PREV is the country doing the check and THIS is the neighbor. |
戰爭
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_war | <bool> Boolean. |
has_war = yes |
如果國家為戰爭狀態該條件為真 | 1.0 | |
has_war_with | <scope> / <variable> The country to check for. |
has_war_with = GER has_war_with = var:country |
如果國家與參數的國家互相戰爭則該條件為真 | 1.0 | |
has_civil_war | <bool> Boolean. |
has_civil_war = no |
如果國家為內戰狀態該條件為真 | ||
has_offensive_war_with | <scope> / <variable> The country to check for. |
has_offensive_war_with = GER |
Checks if the current scope is in an offensive war against the specified country. | 1.0 | |
has_defensive_war_with | <scope> / <variable> The country to check for. |
Checks if the current scope is in an defensive war against the specified country. | 1.0 | ||
has_offensive_war | <bool> Boolean. |
has_offensive_war = yes |
Checks if the current scope is in an offensive war. | 1.0 | |
has_defensive_war | <bool> Boolean. |
has_defensive_war = yes |
Checks if the current scope is in a defensive war. | 1.0 | |
has_war_together_with | <scope> / <variable> The country to check for. |
has_war_together_with = GER |
Checks if the current scope is in a war alongside the specified country. | 1.0 | |
surrender_progress | <float> / <variable> The amount to check for. |
surrender_progress > 0.1 |
Checks if the current scope has the specified amount of surrender progress. | Must use either > or < operators. | 1.0 |
any_war_score | <float> The amount to check for. |
any_war_score > 10 |
Checks if the current scope has the specified amount of war progress (not war participation)[1] in any war. | Must use either > or < operators. | 1.0 |
has_capitulated | <bool> Boolean. |
has_capitulated = yes |
Checks if the current scope has capitulated. | 1.0 | |
has_border_war_with | <scope> / <variable> The country to check for. |
has_border_war_with = GER |
Checks if the current scope has a border war with the specified country. | 1.5 | |
has_border_war_between | attacker = <scope> / <variable> The state to check for.
|
has_border_war_between = { attacker = 1 defender = 2 } |
Checks if their is a border war between the two specified states. | 1.5 | |
has_border_war | <bool> Boolean. |
has_border_war = yes |
Checks if the current scope has a border war active. | 1.5 | |
has_added_tension_amount | <float> / <variable> The amount to check for. |
has_added_tension_amount = 10 |
Checks if the current scope has caused the specified amount of World Tension. | Must use either > or < operators. | 1.0 |
has_wargoal_against | <scope> / <variable> The country to check for. |
has_wargoal_against = GER |
Checks if the current scope has any wargoal against the specified country. | 1.0 | |
has_wargoal_against | target = <scope> / <variable> The country to check for.
|
has_wargoal_against = { target = FROM type = take_state } |
Checks if the current scope has a specific wargoal type against the specified country. | 1.8 | |
is_justifying_wargoal_against | <scope> / <variable> The country to check for. |
is_justifying_wargoal_against = GER |
Checks if the current scope is justifying a wargoal against the specified country. | 1.0 | |
has_annex_war_goal | <scope> / <variable> The country to check for. |
has_annex_war_goal = GER |
Checks if the current scope has the Annex wargoal against the specified country. | 1.0 | |
any_claim | <bool> Boolean. |
any_claim = yes |
Checks if the current scope has any claims on another country. | 1.0 | |
is_in_peace_conference | <bool> Boolean. |
is_in_peace_conference = yes |
Checks if the current scope is in a Peace Conference. | 1.0 | |
any_enemy_country | triggers | any_enemy_country = { has_stability > 0.8 } |
Returns true if any country is at war with THIS, exists, and fulfills the sub-triggers; false otherwise. Evaluation stops at the first true sub-trigger. | Within the trigger PREV is the country doing the check and THIS is the enemy. | |
all_enemy_country | triggers | all_enemy_country = { has_stability > 0.8 } |
Returns false if any country is at war with THIS, exists, and fails the sub-triggers; true otherwise. Evaluation stops at the first false sub-trigger. | Within the trigger PREV is the country doing the check and THIS is the enemy. |
地區
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
controls_state(控制省份) | <scope> / <variable> 當前國家是否控制某個省份 |
controls_state = 39 controls_state = var:state |
檢查當前作用域是否對指定的省份有控制權。 | 1.0 | |
owns_state | <scope> / <variable> The state to check for. |
owns_state = 39 |
Checks if the current scope owns the specified state. | 1.0 | |
num_of_controlled_states | <int> The amount to check for. |
num_of_controlled_states = 5 |
Checks if the current scope has the specified amount of controlled states. | Must use either > or < operators. | 1.0 |
num_occupied_states | <int> The amount to check for. |
num_occupied_states = 5 |
Checks if the current scope has the specified amount of occupied states. | Must use either > or < operators. | 1.0 |
has_full_control_of_state | <scope> / <variable> The state to check for. |
has_full_control_of_state = 39 |
Checks if the current scope has control and ownership of the specified state. | 1.3 | |
has_resources_amount | resource = <string> The resource to check for.
|
has_resources_amount = { resource = oil amount > 10 state = 49 } |
Checks if the specified state has the specified amount of the specified resource. | Must use either > or < operators for amount. | 1.3 |
any_owned_state | triggers (state scope) | any_owned_state = { is_coastal = yes } |
Returns true if at least one state controlled by THIS passes the sub-triggers; false otherwise. Evaluation stops early when a state passes the check. | The sub-triggers are evaluated with a state scope for each owned state. | |
all_owned_state | triggers (state scope) | all_owned_state = { is_controlled_by = ROOT } |
Returns false if any state controlled by THIS fails the sub-triggers; true otherwise. Evaluation stops early when a state fails the check. | The sub-triggers are evaluated with a state scope for each owned state. |
軍事
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_army_experience | <float> / <variable> The amount to check for. |
has_army_experience = 10 has_army_experience = var:number |
Checks if the current scope has the specified amount of Army experience. | Must use either > or < operators as = operator checks for the exact value | 1.3 |
has_air_experience | <float> / <variable> The amount to check for. |
has_air_experience = 10 |
Checks if the current scope has the specified amount of Air experience. | Must use either > or < operators as = operator checks for the exact value | 1.3 |
has_navy_experience | <float> / <variable> The amount to check for. |
has_navy_experience = 10 |
Checks if the current scope has the specified amount of Navy experience. | Must use either > or < operators as = operator checks for the exact value | 1.3 |
has_unit_leader | <int> The id to check for. |
has_unit_leader = 1 |
Checks if the current scope has a unit leader with the specified id. | 1.0 | |
has_manpower | <float> / <variable> The amount to check for. |
has_manpower = 1000 |
Checks if the current scope has the specified amount of manpower. | Must use either > or < operators as = operator checks for the exact value | 1.0 |
has_army_manpower | size = <int> The amount to check for. |
has_army_manpower = { size > 1000 |
Checks if the current scope has an army using the specified amount of manpower. | Must use either > or < operators. | 1.0 |
manpower_per_military_factory | <float> The amount to check for. |
manpower_per_military_factory > 1000 |
Checks if the current scope has the specified manpower times their number of military factories. | Must use either > or < operators. | 1.0 |
num_divisions | <int> The amount to check for. |
num_divisions > 5 |
Checks if the current scope has the specified amount of divisions. | Must use either > or < operators. | 1.3 |
num_of_nukes | <int> The amount to check for. |
num_of_nukes > 5 |
Checks if the current scope has the specified amount of nukes. | Must use either > or < operators. | 1.0 |
casualties | <int> The amount to check for. |
casualties > 10000 |
Checks if the current scope has suffered the specified amount of casualties. | Must use either > or < operators. | 1.0 |
amount_manpower_in_deployment_queue | <float> The amount to check for. |
amount_manpower_in_deployment_queue > 1000 |
Checks if the current scope has the specified amount of manpower in their deployment queue. | Must use either > or < operators. | 1.5 |
has_attache_from | <scope> / <variable> The country to check for. |
has_attache_from = GER |
Checks if the current scope has an attache from the specified scope. | 1.5 | |
has_attache | <bool> Boolean. |
has_attache = yes |
Checks if the current scope has an attache. | 1.5 | |
is_lend_leasing | <scope> / <variable> The country to check for. |
is_lend_leasing = GER |
Checks if the current scope is lend leasing to the specified scope. | 1.0 | |
has_template | <string> The name of the template. |
has_template = "Infantry Division" |
Checks if the current scope has a division template of the specified name. | 1.0 | |
has_template_majority_unit | <string> The unit to check for. |
has_template_majority_unit = infantry |
Checks if the current scope has a division template composed mostly of the specified unit. | 1.0 | |
has_template_containing_unit | <string> The name of the unit. |
has_template_containing_unit = light_armor |
Checks if the current scope has a division template contained any of the specified unit. | 1.0 | |
strength_ratio | tag = <scope> The country to check for.
|
strength_ratio = { tag = GER ratio > 1 } |
Checks if the current scope has the specified strength ratio against the specified country. The ratio is the number of fielded divisions of the current scope divided by those of tag (or 1 if tag has no divisions). The ratio gets increased by 10% if the current scope has a stronger air forces.[2]
|
Any comparison operator after ratio other than > gets interpreted as <.
|
1.0 |
naval_strength_ratio | tag = <scope> The country to check for.
|
naval_strength_ratio = { tag = GER ratio = 1 } |
Checks if the current scope has the specified naval strength ratio against the specified country. | 1.0 | |
alliance_strength_ratio | <float> / <variable> The ratio to check for. |
alliance_strength_ratio > 0.5 |
Checks if the current scope and allies has an army strength higher than the specified ratio against estimated enemy strength. | Must use either > or < operators. | 1.0 |
alliance_naval_strength_ratio | <float> / <variable> The ratio to check for. |
alliance_naval_strength_ratio > 0.5 |
Checks if the current scope and allies has an naval strength ratio higher than the specified ratio against estimated enemy strength. | Must use either > or < operators. | 1.0 |
enemies_strength_ratio | <float> / <variable> The ratio to check for. |
enemies_strength_ratio > 0.5 |
Checks if the estimated enemy army strength ratio is higher than the specified ratio. | Must use either > or < operators. | 1.0 |
enemies_naval_strength_ratio | <float> / <variable> The ratio to check for. |
enemies_naval_strength_ratio > 0.5 |
Checks if the estimated enemy naval strength ratio is higher than the specified ratio. | Must use either > or < operators. | 1.0 |
has_army_size | size = <float> The amount to check for.
|
has_army_size = { size > 10 type = armor } |
Checks if the current scope has the specified number of divisions, or of a specified type of division. | Types:
Must use either > or < operators for size. |
1.0 |
has_navy_size | size = <float> The amount to check for.
|
has_navy_size = { size > 10 type = capital_ship } |
Checks if the current scope has the specified number of ships, or of a specified type of ship. | Types:
Must use either > or < operators for size. |
1.0 |
has_deployed_air_force_size | size = <float> The amount to check for.
|
has_deployed_air_force_size = { size > 10 type = cas } |
Checks if the current scope has the specified number of aircraft, or of a specified type of aircraft. | Types:
Must use either > or < operators for size. |
1.0 |
divisions_in_state | size = <float> The amount to check for.
|
divisions_in_state = { type = infantry size > 10 state = 49 } |
Checks if the specified state contains the specified amount of divisions. | Types:
Must use either > or < operators for size. |
1.0 |
divisions_in_border_state | size = <float> The amount to check for.
|
divisions_in_border_state = { type = infantry size > 10 state = 49 border_state = var:state } |
Checks if the border provinces between the specified state and border state contain the specified amount of divisions. | Types:
Must use either > or < operators for size. |
1.5 |
ships_in_state_ports | size = <float> The amount to check for.
|
ships_in_state_ports = { type = capital_ship size > 10 state = 49 } |
Checks if the specified state contains the specified amount of ships, or of ships of the specified type. | Types:
Must use either > or < operators for size. |
1.0 |
has_volunteers_amount_from | tag = <scope> The country to check for.
|
has_volunteers_amount_from = { tag = GER count > 10 } |
Checks if the current scope has recieved volunteers from the specified country of the specified amounts. | Must use either > or < operators for count. | 1.0 |
estimated_intel_max_piercing | tag = <scope> The country to check for.
|
estimated_intel_max_piercing = { tag = GER value > 0.5 } |
Checks if the specified scope has the specified amount of piercing based on the current scope's intel. | Must use either > or < operators for value. | 1.0 |
estimated_intel_max_armor | tag = <scope> The country to check for.
|
estimated_intel_max_armor = { tag = GER value > 0.5 } |
Checks if the specified scope has the specified amount of armor based on the current scope's intel. | Must use either > or < operators for value. | 1.0 |
裝備
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
stockpile_ratio | archetype = <string> The equipment archetype to check for.
|
stockpile_ratio = { archetype = infantry_equipment ratio > 0.5 } |
Checks if the current scope has stockpiled the specified equipment to the specified ratio against fielded equipment of the same type. | Must use either > or < operators for ratio. For the convoy equipment which is not fielded as other equipments, ratio shall be not a percentage but a direct amount (for instance 256 convoys) |
1.5 |
has_equipment | <equipment> = <int> / <variable> The equipment to check for, and the amount to check for. |
has_equipment = { infantry_equipment_1 > 10 } |
Checks if the current scope has the specified equipment to the specified amount. | Must use either > or < operators. | 1.0 |
has_any_license | <bool> Boolean. |
has_any_license = yes |
Checks if the current scope has any licenses from other countries. | 1.0 | |
is_licensing_any_to | <scope> The country to check for. |
is_licensing_any_to = GER |
Checks if the current scope is licensing to the specified scope. | 1.0 | |
is_licensing_to | target = <scope> The country to check for.
|
is_licensing_to = { target = GER archetype = infantry_equipment } is_licensing_to = { target = GER equipment = { type = light_tank_equipment version = 1 } } |
Checks if the current scope is licensing the specified equipment to the specified country. | 1.0 | |
has_license | from = <scope> The country to check for.
|
has_license = { from = GER archetype = infantry_equipment } has_license = { from = GER equipment = { type = light_tank_equipment version = 1 } } |
Checks if the current scope has a license for the specified equipment from the specified country. | 1.0 |
AI
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
ai_irrationality | <int> The amount to check for. |
ai_irrationality > 10 |
Checks if the current scope AI has the specified irrationality. | Must use either > or < operators. | 1.0 |
ai_liberate_desire | target = <scope> The country to check for.
|
ai_liberate_desire = { target = GER count > 1 } |
Checks if the current scope AI has the specified liberation desire towards the specified country. | Must use either > or < operators for count. | 1.0 |
ai_has_role_division | <string> The role to check for. |
ai_has_role_division = infantry |
Checks if the current scope AI has a division with the specified role. | Roles are defined in /Hearts of Iron IV/common/ai_templates/*.txt | 1.0 |
ai_has_role_template | <string> The role to check for. |
ai_has_role_template = armor |
Checks if the current scope AI has a division template with the specified role. | Roles are defined in /Hearts of Iron IV/common/ai_templates/*.txt | 1.0 |
ai_wants_divisions | <int> The amount to check for. |
ai_wants_divisions > 10 |
Checks if the current scope AI desires the specified amount of divisions. | Must use either > or < operators. | 1.0 |
has_template_ai_majority_unit | <string> The unit to check for. |
has_template_ai_majority_unit = infantry |
Checks if the current scope AI has a division template mostly made up of the specified unit. | 1.0 |
地區作用域
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Can be used in state scope.
總覽
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
state | <scope> / <variable> The state to check for. |
state = 10 state = var:state |
Checks if the current scope is the specified state. | 1.0 | |
region | <int> The strategic region id to check for. |
region = 10 |
Checks if the current scope is a state in the specified strategic region. | 1.0 | |
area | <int> The supply area id to check for. |
area = 6 |
Checks if the current scope is a state in the specified supply area. | 1.0 | |
has_state_flag | <string> The flag to check for. |
has_state_flag = my_flag |
Checks if the current scope has the specified flag. | 1.0 | |
has_state_flag | flag = <string> The flag to check.
|
has_state_flag = { flag = my_flag days > 30 date > 1936.6.1 value > 0 } |
Compares the specified flag's last set date, days since last set, and/or value. | If not set, the value comparison is >0 . value is limited between -32768 and 32767.
|
1.0 |
<building> | <building> = <int> The amount of the specified building to to check for. |
arms_factory > 10 |
Checks if the current scope has the specified amount of the specified building. | Must use either > or < operators. | 1.0 |
state_population | <float> The amount to check for. |
state_population > 10000 |
Checks if the current scope has the specified state population. | Must use either > or < operators. | 1.0 |
is_capital | <bool> Boolean. |
is_capital = yes |
Checks if the current scope is a capital. | 1.5 | |
is_controlled_by | <scope> / <variable> The country to check for. |
is_controlled_by = GER |
Checks if the current scope is controlled by the specified country. | 1.0 | |
is_fully_controlled_by | <scope> / <variable> The country to check for. |
is_fully_controlled_by = GER |
Checks if the current scope is fully controlled by the specified country. | 1.5 | |
is_owned_by | <scope> / <variable> The country to check for. |
is_owned_by = GER |
Checks if the current scope is owned by the specified country. | 1.0 | |
is_claimed_by | <scope> / <variable> The country to check for. |
is_claimed_by = GER |
Checks if the current scope is claimed by the specified country. | 1.0 | |
is_core_of | <scope> / <variable> The country to check for. |
is_core_of = GER |
Checks if the current scope is a core of the specified country. | 1.0 | |
is_owned_and_controlled_by | <scope> / <variable> The country to check for. |
is_owned_and_controlled_by = GER |
Checks if the current scope is owned and controlled by the specified country. | 1.0 | |
is_demilitarized_zone | <bool> Boolean. |
is_demilitarized_zone = yes |
Checks if the current scope is a demilitarized zone. | 1.0 | |
is_border_conflict | <bool> Boolean. |
is_border_conflict = yes |
Checks if the current scope is part of a border war. | 1.0 | |
is_in_home_area | <bool> Boolean. |
is_in_home_area = yes |
Checks if the current scope is connected to the capital state over land. | 1.0 | |
is_coastal | <bool> Boolean. |
is_coastal = yes |
Checks if the current scope is a coastal state. | 1.0 | |
is_island_state | <bool> Boolean. |
is_island_state = yes |
Checks if the current scope is a coastal state with no adjacent land states. | 1.0 | |
is_on_continent | <string> The continent to check for. |
is_on_continent = europe |
Checks if the current scope is on the specified continent. | Continents are found in /Hearts of Iron IV/map/continent.txt. | 1.0 |
has_state_category | <string> The category to check for. |
has_state_category = rural |
Checks if the current scope has the specified category. | State categories are found in /Hearts of Iron IV/common/state_category/*.txt. | 1.0 |
state_strategic_value | <int> The amount to check for. |
state_strategic_value > 10 |
Checks if the current scope has the specified strategic value. | Must use either > or < operators. | 1.5 |
state_and_terrain_strategic_value | <int> The amount to check for. |
state_and_terrain_strategic_value > 10 |
Checks if the current scope has the specified state and terrain strategic value. | Must use either > or < operators. | 1.5 |
free_building_slots | building = <string> The building to check for.
|
free_building_slots = { building = arms_factory size > 10 include_locked = yes } |
Checks if the current scope has available slots for the specified amount of buildings. | Must use either > or < operators for size. | 1.0 |
any_province_building_level | building = <string> The building to check for.
|
any_province_building_level = { province = { id = 445 id = 494 limit_to_border = yes } building = bunker level < 5 } |
Checks if the current scope has the specified provincal building at the specified amount in the specified provinces. | Must use either > or < operators for level. | 1.0 |
num_owned_neighbour_states | owner = <scope> The country to check for.
|
num_owned_neighbour_states = { owner = GER count = 2 } |
Checks if the current scope has the specified amount of neighbor states belonging to the specified country. | Must use either > or < operators for count. | 1.0 |
has_claimed_state_in_peace_conference | <scope> / <variable> The country to check for. |
has_claimed_state_in_peace_conference = GER |
Checks if the current scope has been claimed by the specified country in a peace conference. | 1.0 | |
num_claimed_peace_conference_neighbour_states | owner = <scope> The country to check for.
|
num_claimed_peace_conference_neighbour_states = { owner = GER count > 2 } |
Checks if the current scope has the specified amount of neighbor states claimed by the specified country in a peace conference. | Must use either > or < operators for count. | 1.0 |
distance_to | distance = <float> The distance to check for.
|
distance_to = { value > 1000 target = 49 } |
Checks if the current scope is at the specified distance from the specified state. | Must use either > or < operators for distance. | 1.0 |
ships_in_area | area = <int> The strategic region to check for.
|
Checks if the current scope has the specified amount of ships in the specified strategic region. | Must use either > or < operators for count. | 1.0 | |
any_neighbor_state | triggers | any_neighbor_state = { is_coastal = yes } |
Returns true if THIS has at least one adjacent state that fulfills the sub-triggers; false otherwise. Evaluation stops early if any neighbor passes the check. | ||
all_neighbor_state | triggers | all_neighbor_state = { is_coastal = yes } |
Returns false if THIS has no adjacent states or at least one of them fails the sub-triggers; true otherwise. Evaluation stops early if any neighbor fails the check. |
部隊將領作用域
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Can be used in unit leader scope.
總覽
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_id | <int> The id to check for. |
has_id = 1 |
Checks if the current scope has the specificed unit leader id. | 1.5 | |
has_unit_leader_flag | <string> The flag to check for. |
has_unit_leader_flag = my_flag |
Checks if the current scope has the specified flag. | 1.5 | |
has_unit_leader_flag | flag = <string> The flag to check.
|
has_unit_leader_flag = { flag = my_flag days > 30 date > 1936.6.1 value > 0 } |
Compares the specified flag's last set date, days since last set, and/or value. | If not set, the value comparison is >0 . value is limited between -32768 and 32767.
|
1.0 |
is_leading_army | <bool> Boolean. |
is_leading_army = yes |
Checks if the current scope is leading a single army. | 1.5 | |
is_leading_army_group | <bool> Boolean. |
is_leading_army_group = yes |
Checks if the current scope is leading an army group. | 1.5 | |
is_field_marshal | <bool> Boolean. |
is_field_marshal = yes |
Checks if the current scope is a Field Marshal. | 1.5 | |
is_assigned | <bool> Boolean. |
is_assigned = yes |
Checks if the current scope is an assigned unit leader. | 1.5 | |
has_trait | <string> The trait to check for. |
has_trait = offensive_doctrine |
Checks if the current scope has the specified trait. | 1.5 | |
can_select_trait | <string> The trait to check for. |
can_select_trait = offensive_doctrine |
Checks if the current scope can select the specified trait. | 1.5 | |
has_ability | <string> The ability to check for. |
has_ability = glider_planes |
Checks if the current scope has the specified unit leader ability. | 1.5 | |
skill | <int> The amount to check for. |
skill > 1 |
Checks if the current scope has a Skill above the specified amount. | Must use either > or < operators. | 1.0 |
skill_advantage | <int> The amount to check for. |
skill_advantage > 1 |
Checks if the current scope has a Skill advantage above the specified amount in against an enemy unit leader whilst in combat. | Must use either > or < operators. | 1.0 |
planning_skill_level | <int> The amount to check for. |
planning_skill_level > 1 |
Checks if the current scope has a Planning skill above the specified amount. | Must use either > or < operators. | 1.5 |
logistics_skill_level | <int> The amount to check for. |
logistics_skill_level > 1 |
Checks if the current scope has a Logistics skill above the specified amount. | Must use either > or < operators. | 1.5 |
defense_skill_level | <int> The amount to check for. |
defense_skill_level > 1 |
Checks if the current scope has a Defense skill above the specified amount. | Must use either > or < operators. | 1.5 |
attack_skill_level | <int> The amount to check for. |
attack_skill_level > 1 |
Checks if the current scope has a Attack skill above the specified amount. | Must use either > or < operators. | 1.5 |
average_stats | <int> The amount to check for. |
average_stats > 5 |
Checks if the current scope has an average skill above the specified amount. | Must use either > or < operators. | 1.5 |
is_border_war | <bool> Boolean. |
is_border_war = yes |
Checks if the current socpe is in a border war. | 1.5 | |
num_units | <int> The amount to check for. |
num_units > 5 |
Checks if the current scope is commanding the specified amount of divisions. | Must use either > or < operators. | 1.5 |
戰鬥
這部分內容可能已不適合當前版本,最後更新於1.5。 |
These triggers only work in special unit leader combat scopes, i.e. Combat Tactics.
They should not be used in the regular unit leader scopes.
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
hardness | <float> The amount to check for. |
hardness > 0.5 |
Checks if the current scope has the specified amount of hardness. | Must use either > or < operators. | 1.0 |
armor | <float> The amount to check for. |
armor > 0.5 |
Checks if the current scope has the specified amount of armor units. | Must use either > or < operators. | 1.0 |
dig_in | <float> The amount to check for. |
dig_in > 0.5 |
Checks if the current scope has the specified amount of Dig In bonus. | Must use either > or < operators. | 1.0 |
min_planning | <float> The amount to check for. |
min_planning > 0.5 |
Checks if the current scope has the specified amount of planning. | Must use either > or < operators. | 1.0 |
fastest_unit | <float> The speed in km/h to check for. |
fastest_unit > 12 |
Checks if the current scope has a unit with the specified speed. | Must use either > or < operators. | 1.0 |
temperature | <float> The temperature in celsius to check for. |
temperature > 20 |
Checks if the current scope is in a province with a temperature above the specified amount. | Must use either > or < operators. | 1.0 |
reserves | <float> The amount to check for. |
reserves > 10 |
Checks if the current scope has the specified amount of reserves waiting. | Must use either > or < operators. | 1.0 |
has_cavalry_ratio | <float> The ratio to check for. |
has_cavalry_ratio > 0.5 |
Checks if the current scope has the specified ratio of cavalry in their division composition. | Must use either > or < operators. | 1.0 |
has_combat_modifier | <string> The modifier to check for. |
has_combat_modifier = river_crossing |
Checks if the current scope has the specified combat modifier. | 1.0 | |
is_fighting_in_terrain | <string> The terrain to check for. |
is_fighting_in_terrain = desert |
Checks if the current scope is fighting in the specified terrain. | 1.0 | |
phase | <bool> Boolean. |
phase = yes |
Checks if the current scope is in phase. | 1.0 | |
recon_advantage | <bool> Boolean. |
recon_advantage = yes |
Checks if the current scope has a recon advantage. | 1.0 | |
night | <bool> Boolean. |
night = yes |
Checks if the current scope is fighting at night. | 1.0 | |
frontage_full | <bool> Boolean. |
frontage_full = yes |
Checks if the current scope has a full combat width. | 1.0 | |
has_flanked_opponent | <bool> Boolean. |
has_flanked_opponent = yes |
Checks if the current scope has flanked their opponent. | 1.0 | |
has_max_planning | <bool> Boolean. |
has_max_planning = yes |
Checks if the current scope has the maximum planning bonus. | 1.0 | |
has_reserves | <bool> Boolean. |
has_reserves = yes |
Checks if the current scope has any reserves waiting. | 1.0 | |
is_amphibious_invasion | <bool> Boolean. |
is_amphibious_invasion = yes |
Checks if the current scope is performing an amphibious invasion. | 1.0 | |
is_attacker | <bool> Boolean. |
is_attacker = yes |
Checks if the current scope is attacking. | 1.0 | |
is_defender | <bool> Boolean. |
is_defender = yes |
Checks if the current scope is defending. | 1.0 | |
is_winning | <bool> Boolean. |
is_winning = yes |
Checks if the current scope is winning their battle. | 1.0 | |
is_fighting_air_units | <bool> Boolean. |
is_fighting_air_units = yes |
Checks if the current scope is fighting air units. | 1.0 | |
less_combat_width_than_opponent | <bool> Boolean. |
less_combat_width_than_opponent = yes |
Checks if the current scope is fighting with less combat width than their opponent. | 1.0 | |
has_carrier_airwings_on_mission | <bool> Boolean. |
has_carrier_airwings_on_mission = yes |
Checks if the current scope has carrier airwings on a mission. | 1.0 | |
has_carrier_airwings_in_own_combat | <bool> Boolean. |
has_carrier_airwings_in_own_combat = yes |
Checks if the current scope has carrier airwings in their own combat. | 1.0 |
變量
這部分內容可能已不適合當前版本,最後更新於1.5。 |
Can be used in country, state or unit leader scopes.
Name | Parameters | Examples | Description | Notes | Version Added |
---|---|---|---|---|---|
has_variable | <variable> The variable to check. |
has_variable = my_var |
Checks if the specified variables exists for the current scope. | 1.5 | |
check_variable | var = <variable> The variable to check.
|
check_variable = { var = my_var value = 10 compare = greater_than_or_equals } check_variable = { my_var > 10 } |
Check the specified variable for the current scope. | Possible compare types:
|
1.5 |
print_variables | print_global = <bool> Print global variables. Defaults to no .
|
print_variables = { var_list = { myvar1 myvar2 } file = "my_dump_file" text = "my header" } |
Dumps the specified variables from the current scope and optionally the global scope into logs/variable_dumps/<file>.log . Evaluates to true.
|
See Variables#Debugging |
Remember that variables need to refer to the scope they were set in. This means you can't check a country variable in a state scope without scoping the variable.
For example, to get the country variable whilst in a state scope, you'd do the following:
<country> = { <state> = { limit = { check_variable = { from.my_country_var > 0.0 } } } }
See Variables for more information.
運算符
這部分內容可能已不適合當前版本,最後更新於1.5。 |
There are two extra operators for triggers, > (greater than) and < (less than).
They are used for numerical or date triggers, and provide an exclusive check for their value. This means a trigger using them will return true if the result is any number below (or above).
Note that equals in Hearts of Iron 4 only checks for exact equality, i.e. x = y, whereas in previous games it checks for equals or greater than, i.e. x >= y.
Context scopes
這部分內容可能已不適合當前版本,最後更新於1.5。 |
There are three general scopes all triggers operate in:
- country
- state
- unit leader
They give context to a trigger by stating what the trigger is checking against.
Each country acts as a sub-scope of the general country scope, i.e. GER = { }
will check only against Germany, whereas any_country
will check against all countries. Likewise for states and unit leaders.
The important lesson here is that triggers for one type of scope will not work in the other scopes generally (there are exceptions).
References
文檔 | 效果 • 條件 • 定義 • 修正 • 修正列表 • 作用域 • 本地化 • 行動 • Data structures (Flags, Event targets, Country tag aliases, Variables, Arrays) |
編寫腳本 | AI • AI focuses • Autonomous states • Balances of power • 劇本 • 建築 • Characters and traits • Cosmetic tags • 國家 • 師 • 決議 • 裝備 • 事件 • 內閣/民族精神 • 意識形態 • 國策 • 資源 • Scripted GUI • 科技 • 單位 |
地圖 | 地圖 • 地區 • 補給區域 • 戰略區域 |
圖形圖像 | 界面 • 圖形資產 • 實體 • 後特效 • 離子效果 • 字體 |
裝飾性 | 肖像 • 命名列表 • 音樂 • 音效 |
其他 | 控制台指令 • 故障排除 • 模組結構 • 成就代碼分析 |