热键

热键，又称为快捷键，它让玩家无需使用鼠标即可快速实现特定游戏功能。玩家无法对热键键位进行更改。

Top menu hotkeys

The Flag and 8 icon buttons (9 with La Résistance ) to the immediate right of the Flag provide direct access to the primary menus for interaction with your country. The hotkeys for these menu buttons are noted below. They follow, from left to right, across the top row of the keyboard.

Hotkey	Q	Shift+Q	Shift+W	W	E	R	T	Y	U	I
Opens	Government	Decisions	Intelligence agency	Research	Diplomacy	Trade	Construction	Production	Recruit & Deploy	Logistics

Map hotkeys

Key	Action	Description
Ctrl + number	Assign a province or Strategic Region to a number	Left click on a province or Strategic Region to select it. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting a province or Strategic Region. Tip: pressing a number hotkey twice will center the map on your assigned province or Strategic Region.
Ğ	Zoom in
End	Zoom out
Ctrl + F9	Toggle GUI	Hide GUI elements, showing only the map itself. Equivalent to the console command debug_nogui.
Ctrl + F10	Save map	Saves a political province map in the screenshots folder.
Ctrl + Shift + F10	Toggle freeze camera	Disables zooming and panning until the same key combination is pressed again.
F11	Screenshot	Saves a screenshot in the screenshot folder.
Pause/break, Space	Toggle pause	Pauses or unpauses the game. The pause/break key also works in multiplayer.
	Jump to capital

Map mode interface hotkeys

The buttons in the bottom right of the map. Each map mode emphasizes one type of information on the map and often changes the tooltips to that end.

Map Mode Interface

Key	Map Mode or Toggle	Description
Ctrl + F1	All Possible Map Modes	All possible map modes window. Clicking the All Possible Map Modes button or press ^CtrlF1 will open the all possible map modes window revealing 11 different map modes (reference the graphic on the right within this chart). Clicking on one of these map modes will change the game map to the selected mode.
F	Search (Find)	Click the Search button or press F to launch a menu to find countries, states, and cities. Typing at least 2 consecutive letters of the name will bring up a list of names. This list can be narrowed down by typing additional consecutive letters and will show a flag in front of countries, states as having no symbol, and cities with a colored circle (≥ 20 victory points) or a colored square (< 20 victory points). The color of the circle or square indicates ownership/control as follows:  red = enemy,  gray = neutral/friendly,  green = you own/control. Clicking the name will center the map on the selected country, state, or city. Clicking the Go Home button will center the map on your capitol.
F1	Default	Click the Default button or press F1 to see a blend of Political and Terrain map modes making it easier to see country borders as well as the terrain type and controller of each province. This is the mode to pick for land combat as it is useful in following the progression of the war, creating and executing battle plans, and giving orders to armies.
F2	Strategic Navy	Click the Strategic Navy map mode button or press F2 to see a map mode that emphasizes the large naval regions and colors them according to where you have naval superiority (green), parity (yellow), or inferiority (red). It also makes naval bases more prominent and displays more detailed information via tooltips when hovering over sea zones where you have ships patrolling. This is one of three modes which display convoy routes (the others being the Supply Areas map mode and Resource map mode). Finally, it adds small "mission" icons in all sea regions where you have naval units on active missions.
F3	Strategic Air	Click the Strategic Air map mode button or press F3 to see a map mode that emphasizes the large air regions and colors them according to where you have air superiority (green), parity (yellow), or inferiority (red). It also makes air bases more prominent and displays more detailed information via tooltips when hovering over an air zone. Finally, it also displays "mission" icons in each air zone where you have an air wing on a mission.
F4	Supply Areas	Click the Supply Areas map mode button or press F4 to see a map mode that displays all supply regions (which are collections of states). The regions become colored based on the quality of your supply in that region. Hovering the cursor over the center of each region will show the supply flow path and provide additional information via tooltips that identify problem areas and bottlenecks. It is the second map mode that displays your convoy routes (the others being Strategic Navy map mode and the Resource map mode).
F5	Terrain	Click the Terrain map mode button or press F5 to see a map mode that displays the terrain type as simplified colors.
F6	Resistance	Click the Resistance map mode button or press F6 to see a map mode that colors all states based on the current resistance level and changes the tooltip to provide more detailed resistance information.
F7	Compliance	Click the Compliance map mode button or press F7 to see a map mode that colors all states based on the current compliance level and changes the tooltip to provide more detailed compliance information.
F8	Resource	Click the Resource map mode button or press F8 to see a map mode that displays the location, by state, and quantity of all resources available in the world (including those produced by synthetic factories; even in other countries). It is the third map mode that displays your convoy routes (the others being Strategic Navy map mode and Supply Areas map mode).
F9	Infrastructure	Click the Infrastructure map mode button or press F9 to see a map mode that shows the level of infrastructure of each state.
F10	Factions	Click the Factions map mode button or press F10 to see a map mode that displays faction names and colors the world nations by their current faction affiliation.
None	States	Click the States map mode button to color all states based upon their starting category which limits the starting quantity of Construction Slots. The starting color does not change, however, the quantity of building slots can be increased through technology or national focuses.
None	Diplomacy	Click the Diplomacy map mode button to color each nation in the world based on their opinion of the currently selected nation (select new nations by right clicking on them; make sure no units are currently selected). Tooltips for each nation change to display it's opinion of the currently selected nation.  Green = Territory controlled by the currently selected nation.  Blue = Part of the same faction as the currently selected nation.  Gray = Countries with a "neutral" opinion of the currently selected nation.  Orange = Countries with a very bad opinion of the currently selected nation.  Red = Countries at war with the currently selected nation.
None	Players	Click the Players map mode button to display which country is controlled by which player.
None	Population	Click the Population map mode button to show the amount of population in each state.
None	Ideology	Click the Ideology map mode button to color the countries by their ideology.  Blue = Democratic.  Brown = Fascist.  Red = Communist.  Gray = Non-Aligned.
M	Unit Counters	Click the Unit Counters button or press M to toggle the display of All unit counters or just the Player's unit counters on the map.
,	Counter Colors	Click the Unit Color button or press , to toggle the color of allied counters to be country colors or Friendly/Neutral/Enemy colors.
.	Allied Battleplans	Click the Allied Battleplans button or press . to toggle the display of allied battleplans on and off.
N	Day/Night	Click the Day/Night button or press N to toggle the Day/Night map overlay on/off.
None	Fog of War	Click the Fog of War button to toggle the clouds that obscure terrain on and off.
None	Radar	Click the Radar button to toggle the Radar range visibility lines on and off.

Army hotkeys

Key	Action	Description
O	Division Overview	The O key O opens the army Division Overview, also accessible with the button at the top right of the screen.
Ctrl + number	Assign an Army or Divisions to a number	Left click on an Army to select it or left click while holding Shift ⇧Shift to select multiple Divisions. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting an army or combination of Divisions. Tip: pressing a number hotkey twice will center the map on your assigned unit(s).

Battleplan hotkeys

These hotkeys are specifically for use when commanding your land units. These keys are only active when you have units from a single army selected and the battleplan interface is visible (see image to the right).

Key	Order	Description
K	Exercise	Clicking the Exercise button or pressing the K key K will tell all of the divisions in the command to commence the exercise order. This order cancels any battleplans but not existing movement orders. Exercising troops have very low Organization, so should be kept out of combat. Reference Exercise for more detail.
Shift + K	Exercise until trained	Using ⇧Shift+K (or ⇧Shift+LMB) lets troops train until the reach the regular experience level and then stop on an individual basis.
None	Naval Invasion	Clicking the Naval Invasion button after selecting your divisions will highlight all potential launch ports as a turquoise diagonal stripe pattern. After clicking on the desired launch port, it will become a highlighted blue diagonal stripe pattern. Then right click on a highlighted green diagonal stripe pattern coastal province that you wish to invade. The highlighted green diagonal stripe pattern coastal province will turn to a highlighted orange diagonal stripe pattern if done correctly. Once the plan is activated, the invasion will begin to prepare and reserve convoys from your country's pool. Reference Naval Invasion for more detail.
None	Paratroop Order	Clicking the Paratroop Order button, after selecting your paratroop divisions, will highlight all potential "takeoff point" air bases as a turquoise diagonal stripe pattern (if transport planes are based there) or as a yellow diagonal stripe pattern (if no transport planes are based there). After clicking on the desired "takeoff point" air base (requires transport planes in that base), it will become a highlighted blue diagonal stripe pattern. Then right click on a highlighted green diagonal stripe pattern land province that you wish to designate as the drop location. The highlighted green diagonal stripe pattern land province will turn to a highlighted orange diagonal stripe pattern if done correctly. Once the plan is activated, the plan will be carried out provided that you have at least 70% air superiority and sufficient transport planes. Reference Paradrop and Air Superiority for more detail.
Z	Front Line	After going into this mode by clicking the Front Line button or pressing the Z key Z, left click a border with another country to place a front for the selected units along the entire border with that country. Alternatively, you can right click and drag to customize the size of the front line. Note: It is not currently possible to right click and drag a front line across borders with multiple nations unless you are at war. Reference Front Line for more detail.
X	Offensive Line	Can only be used with an army that has at least one Front Line already created. After activating by clicking the Offensive Line button or pressing the X key X, right click and drag to form the line you want your troops to advance to. While holding down right click, hit Tab ⇆Tab to cycle through the possible "starting points" for the arrow. This allows you to create intricate multi-step battleplans. Reference Offensive Line for more detail.
Shift + X	Spearhead	Can only be used with an army that has at least one Front Line already created. After activating by clicking the Spearhead button or pressing the Shift + X key ⇧ShiftX, right click and drag to draw the spearhead line. Compared to the Offensive Line, the Spearhead will aggressively try to take all provinces that were there when the order was first painted. Spearheads are preferred when you need to do overlapping encirclements, cutting off the enemy, or for more controlled, smaller thrusts into enemy territory. Spearheads tend to be narrow thrusts that can be especially useful for armored divisions. Reference Spearhead for more detail. Note: The Spearhead Order is only available with the Together for Victory expansion .
C	Fallback Line	Click the Fallback Line button or press the C key C, then right click and drag to create a defensive line anywhere (not just on a border). This allows you to station divisions in specific provinces or along a specific set of terrain (like a river). Reference Fallback Line for more detail.
V	Garrison Area	Click the Garrison Area button or press the V key V to activate this mode, then select the states for your army to be stationed in. When you are done assigning, click the Garrison Area button or hit V V again to exit this mode. The selected divisions will spread out among the states and occupy cities, airbases, and naval bases. This is generally best used for guarding coastlines or important points in rear areas vs paradrops. Note that unlike other orders, if a Garrison order is assigned to any part of an army, the rest of the army cannot be assigned any other order without first removing the garrison order. It is an exclusive order. Therefore, an army with a garrison order should only include units that will be assigned to that order. Adding any new units to the army automatically has them join the garrison order. Reference Garrison Area for more detail.
Ctrl	Divisions Assignment Mode	Click the Divisions Assignment Mode button or while holding control ^Ctrl, left click on a battle plan to assign the currently selected units to that plan. Alternatively, you can right click on any battleplan while holding control ^Ctrl to select all units currently assigned to that plan.
Ctrl + H	Unassign Divisions Mode	Clicking the Unassign Divisions Mode button, or while holding control and the H key ^Ctrl H, will unassign the currently selected divisions from their orders.
Alt	Edit Mode	Click the Edit Mode button or while holding Alt alt, you can edit existing battleplans. Alt alt + right click and drag alters the length and shape of front lines, offensive lines, and fallback lines. Alt alt + Left Click alters offensive arrows to bend or change their origin point (can even change the origin point to the end of another offensive line).
Del	Delete Order	Clicking the Delete Order button or pressing the Delete key Delete allows you to selectively remove individual battleplans assigned to the current army. Right-clicking the Delete Order button will delete all orders of the currently selected army.

Division management hotkeys

These keys apply when you have divisions currently selected.

Key	Action	Description
None	Disband All Selected Units	Click the Disband All Selected Units button to disband the selected units. This action will return the division manpower to the recruitable population pool and will return the division equipment to the stockpile. Caution: Disbanding surrounded (encircled) units will permanently eliminate the manpower and permanently destroy the equipment.
None	Unassign Units	Click the Unassign Units button to remove the selected divisions from the army. Note that this action preserves the divisions for reassignment to a new or different army.
None	Consolidate	Click the Consolidate button to merge the selected divisions into one unit. This action can be used to take multiple understrength, damaged divisions and create stronger, full strength divisions with no loss of experience. The excess manpower is returned to the recruitable population pool and the excess equipment is returned to the stockpile. Note that this action can only be performed on divisions having the same template.
None	Change Division Template	Click the Change Division Template button to change the selected divisions to a different template from a pull-down menu. Reference Division designer.
S	Select Half	Click the Select Half button or press the S key S to deselect half of the currently selected units as evenly as possible, but does not remove them from an army to which they belong. Press multiple times to continue to split the selection in half (round up). Can be used to select a single unit from a stack. For example: Select a stack of 9 infantry, hit Select Half once (deselects 4, leaving 5 selected). Hit Select Half again (deselects 2, leaving 3 selected). Hit Select Half again (deselects 1, leaving two selected). Hit Select Half a 4th time and there remains only 1 unit selected. Attempting to Select Half of a single unit results in no action. This can be used to quickly grab a stack, hit S 5 or 6 times to get a single unit very quickly and send it on a new mission.
H	Hold	Click the Hold button or press the H key H to order a unit to hold position, effectively canceling any move or attack orders currently assigned to the unit. This will not cancel their assignment to a front line, so if a hold order is given to a unit which is currently being moved due to a battleplan, it will hold only for a moment before immediately resuming their part in the battleplan. See next section.
B	Strategic Redeployment	Click the Strategic Redeployment button or press the B key B before giving divisions a movement command, this will tell the divisions to utilize the strategic redeployment command meaning they will move at a speed of 10 km/h + up to 10 km/h extra, depending on the state's infrastructure.
Ctrl + B	Toggle Strategic Redeployment	Clicking the Strategic Redeployment button or by pressing CTRL B CTRL B after giving divisions a movement command will toggle on/off the strategic redeployment command.
Shift	Waypoint	Like many other strategy games, holding shift ⇧Shift while right clicking sets a series of waypoints for selected units. They will choose the best path to get to each waypoint in succession. This allows units to navigate around problem areas like enemies, bad terrain, or low supply zones. Note: View the full route to check for hazards on the way.
Ctrl	Support Attack	With a unit selected, hold down control ^Ctrl and right click on an existing battle to "support" that battle. Supporting a battle will allow the unit to participate in the battle, but it will *not* leave its province and enter the battle hex upon conclusion. This can be very valuable to preserve the integrity of the front line.
Ctrl + H	Remove from Assigned Battleplan	This key combination ^Ctrl H removes the currently selected divisions from their current battleplan without removing them from their current army. This is the only known way to remove multiple divisions from an assigned battleplan without giving them a new battleplan. When they are removed, they become independent divisions within the army that can be given direct orders separately , or assigned to another battleplan. Note that this will not work for units that are part of an army that has any garrison order.

Naval hotkeys

Key	Action	Description
Ctrl + number	Assign a Task Force(s) to a number	Left click on a Task Force to select it or left click while holding Shift ⇧Shift to select multiple Task Forces. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting a Task Force or combination of Task Forces. Tip: pressing a number hotkey twice will center the map on your assigned unit(s).
P	Navy Overview	The P key P opens the Navy Overview, also accessible with the button at the top right of the screen.
D	Split	Splits/Divides the selected task force into two task forces.
S	Select Half	Selects half of the currently selected naval units. It tries to keep an equal number of each type of vessel in each new task force.
G	Merge	Merges the selected task forces into one task force. If the ships are not in the same province, then they will find a path to each other to merge.
K	Naval Exercises	Orders a task force to perform exercises in the region adjacent to the closest naval base. Ship crews within the task force gain ship experience while the country gains navy experience, but it costs fuel and can cause ship damage. Notes: 1. Ship crews will not gain experience beyond Regular level 2. The task force will continue to exercise until halted manually.
Shift + K	Naval Exercises until trained	Enables Naval Exercises until all ships in a task force are fully trained to Regular level, at which time the task force automatically stops exercising and returns to its naval base.
H	Hold	Cancels the current task force mission and moves the task force to the closest port.
Ctrl + H	Hold	Cancels the current task force mission and causes the task force to stay put. Notes: 1. Capital ships on Hold in a sea province neighboring a land battle will help out with shore bombardment. 2. Carriers on Hold while at sea will be able to use their airwings for standard air missions.
Z	Patrol	Order a task force to patrol the selected regions with the primary purpose of spotting enemy fleets.
X	Strike Force	Order a task force to wait at the closest naval base until a patrol task force spots an enemy task force, then the strike force will move to intercept it.
C	Convoy Raiding	Order a task force to raid enemy convoys in the selected regions.
V	Convoy Escort	Order a task force to escort convoys in the selected regions to protect them against enemies.
B	Minelaying	Order a task force to lay sea mines in the selected regions.
Shift + B	Minesweeping	Order a task force to search and neutralize enemy sea mines in the selected regions.
A	Naval Invasion Support	Order ships to escort naval invasions and support them with shore bombardment.

Air hotkeys

Key	Action	Description
Ctrl + number	Assign an Air Wing(s) to a number	Left click on an Air Wing to select it or left click while holding Shift ⇧Shift to select multiple Air Wings. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting an Air Wing or combination of Air Wings. Tip: pressing a number hotkey twice will center the map on your assigned unit(s).
L	Airforce Overview	The L key L opens the Airforce Overview, also accessible with the button at the top right of the screen.
F	Duplicate	Duplicate selected air wings for all where this is possible.
D	Split	Splits/Divides the selected air wings in two.
G	Merge	Merges two or more selected wings into one wing. Note: each wing can hold up to a maximum of 1000 planes.
O	Reorganize	Opens reorganize option to reorganize your wings and change reinforcement rules.
A	Select/Deselect All	Selects/Deselects all of the air wings in a given airfield or carrier.
S	Select Half	Selects half of the currently selected air wings.
H	Hold Order	Holds selected air wings.
N	New Wing	Opens new wing option to add to the selected airfield or carrier.
K	Pilot Exercises	Gains experience for selected air wing in addition to air experience, but costs fuel and increases risk of accidents.
Shift + K	Pilot Exercises until trained	Enables pilot exercises until air wing is fully trained.
Z	Air Superiority Mission	Orders selected air wings to conduct an air superiority mission.
X	Close Air Support Mission	Orders selected air wings to conduct a close air support mission .
C	Interception Mission	Orders selected air wings to conduct an interception mission.
V	Strategic Bombing Mission	Orders selected air wings to conduct a strategic bombing mission.
B	Naval Strike Mission	Orders selected air wings to conduct a naval strike mission.
J	Port Strike Mission	Orders selected air wings to conduct a port strike mission.
Ctrl + B	Kamikaze Strike Mission	Orders selected air wings to conduct a kamikaze strike mission.