热键:修订间差异

本页面所适用的版本可能已经过时,最后更新于1.9
无编辑摘要
无编辑摘要
第134行: 第134行:
!描述
!描述
|-
|-
|K||[[File:Exercise transparent.png]] Exercise
|K||[[File:Exercise transparent.png]] 演习
|Clicking the Exercise button or pressing the K key {{key press|K}} will tell all of the divisions in the command to commence the exercise order. This order cancels any battleplans but not existing movement orders.  Exercising troops have very low Organization, so should be kept out of combat.  Reference [[Command group#Exercise|Exercise]] for more detail.
|Clicking the Exercise button or pressing the K key {{key press|K}} will tell all of the divisions in the command to commence the exercise order. This order cancels any battleplans but not existing movement orders.  Exercising troops have very low Organization, so should be kept out of combat.  Reference [[Command group#Exercise|Exercise]] for more detail.
|-
|-
|Shift + K||[[File:Exercise until trained transparent.png]] Exercise until trained
|Shift + K||[[File:Exercise until trained transparent.png]] 演习到训练完成
|Using {{key press|Shift}}+{{key press|K}} (or {{key press|Shift}}+{{key press|LMB}}) lets troops train until the reach the '''regular''' [[Experience#Unit_experience|experience level]] and then stop on an individual basis.
|Using {{key press|Shift}}+{{key press|K}} (or {{key press|Shift}}+{{key press|LMB}}) lets troops train until the reach the '''regular''' [[Experience#Unit_experience|experience level]] and then stop on an individual basis.
|-
|-
|None||[[File:Naval Invasion deselected.png]] Naval Invasion
|None||[[File:Naval Invasion deselected.png]] 海军入侵
|Clicking the Naval Invasion button after selecting your divisions will highlight all potential launch ports as a turquoise diagonal stripe pattern.  After clicking on the desired launch port, it will become a highlighted blue diagonal stripe pattern.  Then right click on a highlighted green diagonal stripe pattern coastal province that you wish to invade.  The highlighted green diagonal stripe pattern coastal province will turn to a highlighted orange diagonal stripe pattern if done correctly.  Once the plan is activated, the invasion will begin to prepare and reserve convoys from your country's pool.  Reference [[Battle plan#Naval Invasion|Naval Invasion]] for more detail.
|Clicking the Naval Invasion button after selecting your divisions will highlight all potential launch ports as a turquoise diagonal stripe pattern.  After clicking on the desired launch port, it will become a highlighted blue diagonal stripe pattern.  Then right click on a highlighted green diagonal stripe pattern coastal province that you wish to invade.  The highlighted green diagonal stripe pattern coastal province will turn to a highlighted orange diagonal stripe pattern if done correctly.  Once the plan is activated, the invasion will begin to prepare and reserve convoys from your country's pool.  Reference [[Battle plan#Naval Invasion|Naval Invasion]] for more detail.
|-
|-
|None||[[File:Paradrop deselected.png]] Paratroop Order
|None||[[File:Paradrop deselected.png]] 伞兵指令
|Clicking the Paratroop Order button, after selecting your paratroop divisions, will highlight all potential "takeoff point" air bases as a turquoise diagonal stripe pattern (if transport planes are based there) or as a yellow diagonal stripe pattern (if no transport planes are based there).  After clicking on the desired "takeoff point" air base (requires transport planes in that base), it will become a highlighted blue diagonal stripe pattern.  Then right click on a highlighted green diagonal stripe pattern land province that you wish to designate as the drop location.  The highlighted green diagonal stripe pattern land province will turn to a highlighted orange diagonal stripe pattern if done correctly.  Once the plan is activated, the plan will be carried out provided that you have at least 70% air superiority and sufficient transport planes.  Reference [[Battle plan#Paradrop|Paradrop]] and [[Air warfare#Air superiority|Air Superiority]] for more detail.
|Clicking the Paratroop Order button, after selecting your paratroop divisions, will highlight all potential "takeoff point" air bases as a turquoise diagonal stripe pattern (if transport planes are based there) or as a yellow diagonal stripe pattern (if no transport planes are based there).  After clicking on the desired "takeoff point" air base (requires transport planes in that base), it will become a highlighted blue diagonal stripe pattern.  Then right click on a highlighted green diagonal stripe pattern land province that you wish to designate as the drop location.  The highlighted green diagonal stripe pattern land province will turn to a highlighted orange diagonal stripe pattern if done correctly.  Once the plan is activated, the plan will be carried out provided that you have at least 70% air superiority and sufficient transport planes.  Reference [[Battle plan#Paradrop|Paradrop]] and [[Air warfare#Air superiority|Air Superiority]] for more detail.
|-
|-
|Z||[[File:Front Line deselected.png]] Front Line
|Z||[[File:Front Line deselected.png]] 前线
|After going into this mode by clicking the Front Line button or pressing the Z key {{key press|Z}}, left click a border with another country to place a front for the selected units along the entire border with that country. Alternatively, you can right click and drag to customize the size of the front line. Note: It is not currently possible to right click and drag a front line across borders with multiple nations unless you are at war.  Reference [[Battle_plan#Front Line and Offensive Line|Front Line]] for more detail.
|After going into this mode by clicking the Front Line button or pressing the Z key {{key press|Z}}, left click a border with another country to place a front for the selected units along the entire border with that country. Alternatively, you can right click and drag to customize the size of the front line. Note: It is not currently possible to right click and drag a front line across borders with multiple nations unless you are at war.  Reference [[Battle_plan#Front Line and Offensive Line|Front Line]] for more detail.
|-
|-
|X||[[File:Offensive Line deselected.png]] Offensive Line
|X||[[File:Offensive Line deselected.png]] 进攻线
|Can only be used with an army that has at least one Front Line already created. After activating by clicking the Offensive Line button or pressing the X key {{key press|X}}, right click and drag to form the line you want your troops to advance to. While holding down right click, hit Tab {{key press|Tab}} to cycle through the possible "starting points" for the arrow. This allows you to create intricate multi-step battleplans.  Reference [[Battle_plan#Front Line and Offensive Line|Offensive Line]] for more detail.
|Can only be used with an army that has at least one Front Line already created. After activating by clicking the Offensive Line button or pressing the X key {{key press|X}}, right click and drag to form the line you want your troops to advance to. While holding down right click, hit Tab {{key press|Tab}} to cycle through the possible "starting points" for the arrow. This allows you to create intricate multi-step battleplans.  Reference [[Battle_plan#Front Line and Offensive Line|Offensive Line]] for more detail.
|-
|-
|Shift + X||[[File:Spearhead deselected.png]] Spearhead
|Shift + X||[[File:Spearhead deselected.png]] 穿插命令
|Can only be used with an army that has at least one Front Line already created. After activating by clicking the Spearhead button or pressing the Shift + X key {{key press|Shift}}{{key press|X}}, right click and drag to draw the spearhead line. Compared to the Offensive Line, the Spearhead will aggressively try to take all provinces that were there when the order was first painted.  Spearheads are preferred when you need to do overlapping encirclements, cutting off the enemy, or for more controlled, smaller thrusts into enemy territory. Spearheads tend to be narrow thrusts that can be especially useful for armored divisions.  Reference [[Battle_plan#Spearhead|Spearhead]] for more detail.  Note: The Spearhead Order [[File:Spearhead deselected.png|22px]] is only available with the [[Together for Victory|Together for Victory]] expansion [[File:Together for Victory icon.png|22px]].
|Can only be used with an army that has at least one Front Line already created. After activating by clicking the Spearhead button or pressing the Shift + X key {{key press|Shift}}{{key press|X}}, right click and drag to draw the spearhead line. Compared to the Offensive Line, the Spearhead will aggressively try to take all provinces that were there when the order was first painted.  Spearheads are preferred when you need to do overlapping encirclements, cutting off the enemy, or for more controlled, smaller thrusts into enemy territory. Spearheads tend to be narrow thrusts that can be especially useful for armored divisions.  Reference [[Battle_plan#Spearhead|Spearhead]] for more detail.  Note: The Spearhead Order [[File:Spearhead deselected.png|22px]] is only available with the [[Together for Victory|Together for Victory]] expansion [[File:Together for Victory icon.png|22px]].
|-
|-
|C||[[File:Fallback line deselected.png]] Fallback Line
|C||[[File:Fallback line deselected.png]] 防御线
|Click the Fallback Line button or press the C key {{key press|C}}, then right click and drag to create a defensive line anywhere (not just on a border). This allows you to station divisions in specific provinces or along a specific set of terrain (like a river).  Reference [[Battle_plan#Fallback_Line|Fallback Line]] for more detail.
|Click the Fallback Line button or press the C key {{key press|C}}, then right click and drag to create a defensive line anywhere (not just on a border). This allows you to station divisions in specific provinces or along a specific set of terrain (like a river).  Reference [[Battle_plan#Fallback_Line|Fallback Line]] for more detail.
|-
|-
|V||[[File:Garrison Area deselected.png]] Garrison Area
|V||[[File:Garrison Area deselected.png]] 区域防卫
|Click the Garrison Area button or press the V key {{key press|V}} to activate this mode, then select the states for your army to be stationed in. When you are done assigning, click the Garrison Area button or hit V {{key press|V}} again to exit this mode. The selected divisions will spread out among the states and occupy cities, airbases, and naval bases. This is generally best used for guarding coastlines or important points in rear areas vs paradrops. Note that unlike other orders, if a Garrison order is assigned to any part of an army, the rest of the army cannot be assigned any other order without first removing the garrison order. It is an exclusive order. Therefore, an army with a garrison order should only include units that will be assigned to that order. Adding any new units to the army automatically has them join the garrison order.  Reference [[Battle plan#Garrison Area|Garrison Area]] for more detail.
|Click the Garrison Area button or press the V key {{key press|V}} to activate this mode, then select the states for your army to be stationed in. When you are done assigning, click the Garrison Area button or hit V {{key press|V}} again to exit this mode. The selected divisions will spread out among the states and occupy cities, airbases, and naval bases. This is generally best used for guarding coastlines or important points in rear areas vs paradrops. Note that unlike other orders, if a Garrison order is assigned to any part of an army, the rest of the army cannot be assigned any other order without first removing the garrison order. It is an exclusive order. Therefore, an army with a garrison order should only include units that will be assigned to that order. Adding any new units to the army automatically has them join the garrison order.  Reference [[Battle plan#Garrison Area|Garrison Area]] for more detail.
|-
|-
|Ctrl||[[File:Divisions assignment mode deselected.png]] Divisions Assignment Mode
|Ctrl||[[File:Divisions assignment mode deselected.png]] 分配陆军师模式
|Click the Divisions Assignment Mode button or while holding control {{key press|ctrl}}, left click on a battle plan to assign the currently selected units to that plan. Alternatively, you can right click on any battleplan while holding control {{key press|ctrl}} to select all units currently assigned to that plan.
|Click the Divisions Assignment Mode button or while holding control {{key press|ctrl}}, left click on a battle plan to assign the currently selected units to that plan. Alternatively, you can right click on any battleplan while holding control {{key press|ctrl}} to select all units currently assigned to that plan.
|-
|-
|Ctrl + H||[[File:Unassign Divisions.png]] Unassign Divisions Mode
|Ctrl + H||[[File:Unassign Divisions.png]] 取消分配陆军师模式
|Clicking the Unassign Divisions Mode button, or while holding control and the H key {{key press|ctrl}} {{key press|H}}, will unassign the currently selected divisions from their orders.
|Clicking the Unassign Divisions Mode button, or while holding control and the H key {{key press|ctrl}} {{key press|H}}, will unassign the currently selected divisions from their orders.
|-
|-
|Alt||[[File:Edit mode deselected.png]] Edit Mode
|Alt||[[File:Edit mode deselected.png]] 编辑模式
|Click the Edit Mode button or while holding Alt {{key press|alt}}, you can edit existing battleplans. Alt {{key press|alt}} + right click and drag alters the length and shape of front lines, offensive lines, and fallback lines. Alt {{key press|alt}} + Left Click alters offensive arrows to bend or change their origin point (can even change the origin point to the end of another offensive line).
|Click the Edit Mode button or while holding Alt {{key press|alt}}, you can edit existing battleplans. Alt {{key press|alt}} + right click and drag alters the length and shape of front lines, offensive lines, and fallback lines. Alt {{key press|alt}} + Left Click alters offensive arrows to bend or change their origin point (can even change the origin point to the end of another offensive line).
|-
|-
|Del||[[File:Delete Order deselected.png]] Delete Order
|Del||[[File:Delete Order deselected.png]] 删除命令
|Clicking the Delete Order button or pressing the Delete key {{key press|Del}} allows you to selectively remove individual battleplans assigned to the current army.  Right-clicking the Delete Order button will delete all orders of the currently selected army.
|Clicking the Delete Order button or pressing the Delete key {{key press|Del}} allows you to selectively remove individual battleplans assigned to the current army.  Right-clicking the Delete Order button will delete all orders of the currently selected army.
|}
|}
第181行: 第181行:
!描述
!描述
|-
|-
|None||[[File:Disband All Selected Units.png]] Disband All Selected Units
|None||[[File:Disband All Selected Units.png]] 解散所有陆军师
|Click the Disband All Selected Units button to disband the selected units.  This action will return the division manpower to the recruitable population pool and will return the division equipment to the stockpile.  '''Caution''':  Disbanding surrounded (encircled) units will permanently eliminate the manpower and permanently destroy the equipment.
|Click the Disband All Selected Units button to disband the selected units.  This action will return the division manpower to the recruitable population pool and will return the division equipment to the stockpile.  '''Caution''':  Disbanding surrounded (encircled) units will permanently eliminate the manpower and permanently destroy the equipment.
|-
|-
|None||[[File:Unassign Units.png]] Unassign Units
|None||[[File:Unassign Units.png]] 取消分配陆军师
|Click the Unassign Units button to remove the selected divisions from the army.  Note that this action preserves the divisions for reassignment to a new or different army.
|Click the Unassign Units button to remove the selected divisions from the army.  Note that this action preserves the divisions for reassignment to a new or different army.
|-
|-
第190行: 第190行:
|Click the Consolidate button to merge the selected divisions into one unit.  This action can be used to take multiple understrength, damaged divisions and create stronger, full strength divisions with no loss of experience.  The excess manpower is returned to the recruitable population pool and the excess equipment is returned to the stockpile.  Note that this action can only be performed on divisions having the same template.
|Click the Consolidate button to merge the selected divisions into one unit.  This action can be used to take multiple understrength, damaged divisions and create stronger, full strength divisions with no loss of experience.  The excess manpower is returned to the recruitable population pool and the excess equipment is returned to the stockpile.  Note that this action can only be performed on divisions having the same template.
|-
|-
|None||[[File:Change Division Template.png]] Change Division Template
|None||[[File:Change Division Template.png]] 切换陆军师编制
|Click the Change Division Template button to change the selected divisions to a different template from a pull-down menu.  Reference [[Division designer]].
|Click the Change Division Template button to change the selected divisions to a different template from a pull-down menu.  Reference [[Division designer]].
|-
|-
|S||[[File:Select half.png]] Select Half
|S||[[File:Select half.png]] 选择一半
|Click the Select Half button or press the S key {{key press|S}} to deselect half of the currently selected units as evenly as possible, but does not remove them from an army to which they belong. Press multiple times to continue to split the selection in half (round up). Can be used to select a single unit from a stack. For example: Select a stack of 9 infantry, hit Select Half once (deselects 4, leaving 5 selected). Hit Select Half again (deselects 2, leaving 3 selected). Hit Select Half again (deselects 1, leaving two selected). Hit Select Half a 4th time and there remains only 1 unit selected. Attempting to Select Half of a single unit results in no action. This can be used to quickly grab a stack, hit {{key press|S}} 5 or 6 times to get a single unit very quickly and send it on a new mission.
|Click the Select Half button or press the S key {{key press|S}} to deselect half of the currently selected units as evenly as possible, but does not remove them from an army to which they belong. Press multiple times to continue to split the selection in half (round up). Can be used to select a single unit from a stack. For example: Select a stack of 9 infantry, hit Select Half once (deselects 4, leaving 5 selected). Hit Select Half again (deselects 2, leaving 3 selected). Hit Select Half again (deselects 1, leaving two selected). Hit Select Half a 4th time and there remains only 1 unit selected. Attempting to Select Half of a single unit results in no action. This can be used to quickly grab a stack, hit {{key press|S}} 5 or 6 times to get a single unit very quickly and send it on a new mission.
|-
|-
|H||[[File:Hold Order.png]] Hold
|H||[[File:Hold Order.png]] 停止
|Click the Hold button or press the H key {{key press|H}} to order a unit to hold position, effectively canceling any move or attack orders currently assigned to the unit. This will not cancel their assignment to a front line, so if a hold order is given to a unit which is currently being moved due to a battleplan, it will hold only for a moment before immediately resuming their part in the battleplan. See next section.
|Click the Hold button or press the H key {{key press|H}} to order a unit to hold position, effectively canceling any move or attack orders currently assigned to the unit. This will not cancel their assignment to a front line, so if a hold order is given to a unit which is currently being moved due to a battleplan, it will hold only for a moment before immediately resuming their part in the battleplan. See next section.
|-
|-
|B||[[File:Strategic redeployment.png]] Strategic Redeployment
|B||[[File:Strategic redeployment.png]] 战略转移
|Click the Strategic Redeployment button or press the B key {{key press|B}} before giving divisions a movement command, this will tell the divisions to utilize the strategic redeployment command meaning they will move at a speed of {{green|10}} km/h {{green|+ up to 10}} km/h extra, depending on the state's infrastructure.
|Click the Strategic Redeployment button or press the B key {{key press|B}} before giving divisions a movement command, this will tell the divisions to utilize the strategic redeployment command meaning they will move at a speed of {{green|10}} km/h {{green|+ up to 10}} km/h extra, depending on the state's infrastructure.
|-
|-
第228行: 第228行:
|Splits/Divides the selected task force into two task forces.
|Splits/Divides the selected task force into two task forces.
|-
|-
|S||[[File:Select half.png]] Select Half
|S||[[File:Select half.png]] 选择一半
|Selects half of the currently selected naval units. It tries to keep an equal number of each type of vessel in each new task force.
|Selects half of the currently selected naval units. It tries to keep an equal number of each type of vessel in each new task force.
|-
|-
|G||[[File:Merge.png]] Merge
|G||[[File:Merge.png]] 合并特遣舰队
|Merges the selected task forces into one task force. If the ships are not in the same province, then they will find a path to each other to merge.
|Merges the selected task forces into one task force. If the ships are not in the same province, then they will find a path to each other to merge.
|-
|-
|K||[[File:Naval Exercises.png]] Naval Exercises
|K||[[File:Naval Exercises.png]] 海军演习
|Orders a task force to perform exercises in the region adjacent to the closest naval base.  Ship crews within the task force gain ship experience while the country gains navy experience, but it costs fuel and can cause ship damage.  Notes:<br>1. Ship crews will not gain experience beyond Regular level<br>2. The task force will continue to exercise until halted manually.
|Orders a task force to perform exercises in the region adjacent to the closest naval base.  Ship crews within the task force gain ship experience while the country gains navy experience, but it costs fuel and can cause ship damage.  Notes:<br>1. Ship crews will not gain experience beyond Regular level<br>2. The task force will continue to exercise until halted manually.
|-
|-
|Shift + K||[[File:Naval exercises until trained.png]] Naval Exercises until trained
|Shift + K||[[File:Naval exercises until trained.png]] 海军演习到训练完成
|Enables Naval Exercises until all ships in a task force are fully trained to Regular level, at which time the task force automatically stops exercising and returns to its naval base.
|Enables Naval Exercises until all ships in a task force are fully trained to Regular level, at which time the task force automatically stops exercising and returns to its naval base.
|-
|-
第246行: 第246行:
|Cancels the current task force mission and causes the task force to stay put.<br>Notes:<br>1. Capital ships on Hold in a sea province neighboring a land battle will help out with [[Naval_warfare#Shore_bombardment|'''shore bombardment''']].<br>2. Carriers on Hold while at sea will be able to use their airwings for standard air missions.
|Cancels the current task force mission and causes the task force to stay put.<br>Notes:<br>1. Capital ships on Hold in a sea province neighboring a land battle will help out with [[Naval_warfare#Shore_bombardment|'''shore bombardment''']].<br>2. Carriers on Hold while at sea will be able to use their airwings for standard air missions.
|-
|-
|Z||[[File:Patrol.png]] Patrol
|Z||[[File:Patrol.png]] 巡逻
|Order a task force to patrol the selected regions with the primary purpose of spotting enemy fleets.
|Order a task force to patrol the selected regions with the primary purpose of spotting enemy fleets.
|-
|-
|X||[[File:Strike Force.png]] Strike Force
|X||[[File:Strike Force.png]] 打击舰队
|Order a task force to wait at the closest naval base until a patrol task force spots an enemy task force, then the strike force will move to intercept it.
|Order a task force to wait at the closest naval base until a patrol task force spots an enemy task force, then the strike force will move to intercept it.
|-
|-
|C||[[File:Convoy Raiding.png]] Convoy Raiding
|C||[[File:Convoy Raiding.png]]  袭击运输船
|Order a task force to raid enemy convoys in the selected regions.
|Order a task force to raid enemy convoys in the selected regions.
|-
|-
|V||[[File:Convoy Escort.png]] Convoy Escort
|V||[[File:Convoy Escort.png]] 保护运输船
|Order a task force to escort convoys in the selected regions to protect them against enemies.
|Order a task force to escort convoys in the selected regions to protect them against enemies.
|-
|-
|B||[[File:Minelaying.png]] Minelaying
|B||[[File:Minelaying.png]] 布置水雷
|Order a task force to lay sea mines in the selected regions.{{expansion|mtg}}
|Order a task force to lay sea mines in the selected regions.{{expansion|mtg}}
|-
|-
第264行: 第264行:
|Order a task force to search and neutralize enemy sea mines in the selected regions.{{expansion|mtg}}
|Order a task force to search and neutralize enemy sea mines in the selected regions.{{expansion|mtg}}
|-
|-
|A||[[File:Naval Invasion Support.png]] Naval Invasion Support
|A||[[File:Naval Invasion Support.png]] 海军入侵支援
|Order ships to escort naval invasions and support them with shore bombardment.
|Order ships to escort naval invasions and support them with shore bombardment.
|}
|}
第278行: 第278行:
|The L key {{key press|L}} opens the Airforce Overview, also accessible with the button at the top right of the screen.
|The L key {{key press|L}} opens the Airforce Overview, also accessible with the button at the top right of the screen.
|-
|-
|F||[[File:Duplicate air wing.png]] Duplicate
|F||[[File:Duplicate air wing.png]] 复制
|Duplicate selected air wings for all where this is possible.
|Duplicate selected air wings for all where this is possible.
|-
|-
|D||[[File:Split.png]] Split
|D||[[File:Split.png]] 分开
|Splits/Divides the selected air wings in two.
|Splits/Divides the selected air wings in two.
|-
|-
|G||[[File:Merge.png]] Merge
|G||[[File:Merge.png]] 合并空军联队
|Merges two or more selected wings into one wing. Note: each wing can hold up to a maximum of 1000 planes.
|Merges two or more selected wings into one wing. Note: each wing can hold up to a maximum of 1000 planes.
|-
|-
第290行: 第290行:
|Opens reorganize option to reorganize your wings and change reinforcement rules.
|Opens reorganize option to reorganize your wings and change reinforcement rules.
|-
|-
|A||[[File:Air select all.png]] Select/Deselect All
|A||[[File:Air select all.png]] 选择/ 取消选择
|Selects/Deselects all of the air wings in a given airfield or carrier.
|Selects/Deselects all of the air wings in a given airfield or carrier.
|-
|-
|S||[[File:Select half.png]] Select Half
|S||[[File:Select half.png]] 选择一半
|Selects half of the currently selected air wings.
|Selects half of the currently selected air wings.
|-
|-
|H||[[File:Hold Order.png]] Hold Order
|H||[[File:Hold Order.png]] 停止
|Holds selected air wings.
|Holds selected air wings.
|-
|-
|N||[[File:New Wing.png]] New Wing
|N||[[File:New Wing.png]] 新建空军联队
|Opens new wing option to add to the selected airfield or carrier.
|Opens new wing option to add to the selected airfield or carrier.
|-
|-
|K||[[File:Pilot Exercises Mission transparent.png]] Pilot Exercises
|K||[[File:Pilot Exercises Mission transparent.png]] 飞行员演习
|Gains experience for selected air wing in addition to air experience, but costs fuel and increases risk of accidents.
|Gains experience for selected air wing in addition to air experience, but costs fuel and increases risk of accidents.
|-
|-

2021年8月25日 (三) 12:06的版本

热键Keyboard shortcuts),又称为快捷键,它让玩家无需使用鼠标即可快速实现特定游戏功能。玩家无法更改热键键位。

顶部菜单快捷键

通过国旗和紧邻国旗右侧的8个图标按钮(启用抵抗运动DLC会有9个图标按钮),可直接进入与您的国家进行交互的主要菜单。这些菜单的快捷键如下图所示。它们是键盘最上面的一排,从左到右依次排列。

Qwertyui hotkeys.png
快捷键 Q Shift+Q Shift+W W E R T Y U I
打开界面 政府 决议 情报机构 研究 外交 贸易 建设 生产 招募与部署 后勤

地图快捷键

键位 操作 描述
Ctrl + 数字键 将号码分配给省份或战略地区 左键单击选中一个省份或战略区域。然后按住 ^Ctrl 键,再按数字键 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 。此过程将指定按下的数字键为热键,以便快速选择省份或战略区域。提示:连按两次数字热键将会使您指定的省份或战略区域成为地图视野中心。
G 放大
End 缩小
Ctrl + F9 切换操作界面 隐藏操作界面,仅显示地图本身。此操作等效于控制台命令debug_nogui。
Ctrl + F10 保存地图 将地图保存在screenshots文件夹中。
Ctrl + Shift + F10 切换定格相机 禁用缩放和平移,直到再次按下相同的键位组合。
F11 屏幕截图 将屏幕截图保存在screenshot文件夹中。
Pause/break, Space 切换暂停 暂停或取消暂停游戏。暂停/中断键也可在多人游戏中使用。
视野跳至首都

地图模式界面快捷键

.该类快捷键为地图右下角的按钮。每种地图模式都突出强调地图上的一种信息,并经常为此目的更改提示信息。

Puzzle globe
地图模式界面
键位 地图模式切换 描述
Ctrl + F1 Mapmodes open all button.png 所有可用的地图模式
所有可用的地图模式窗口界面
单击“所有可用的地图模式”按钮或按 ^Ctrl + F1 将打开所有可能使用的地图模式窗口界面,界面显示有11种不同的地图模式(请参考图表右侧的图样)。单击任何一种地图模式将会切换游戏地图为所选模式。
F Search button.png 搜索(查找)界面 单击“搜索界面”按钮或按 F 以启动菜单来查找国家,地区和城市。键入名称的至少两个连续字母或文字将显示一个名称列表。也可以通过键入额外的连续字母或文字来缩小此列表的范围,并将在国家、没有符号的地区、带有颜色的圆圈(≥20胜利点)或带有颜色的正方形(<20胜利点)的城市的前面显示一个标志。圆圈或正方形的颜色表示的所有权/控制权如下:
红色表示敌对/处于战争;
灰色表示中立/友好;
绿色表示玩家拥有/控制。


单击名称将使地图视野以所选国家、地区或城市为中心。单击“回家”按钮会将地图视野中心置于您的国会大厦。

F1 Default map mode button.png 默认地图模式 单击“默认地图模式”按钮或按 F1 以查看政治地图和地形地图的混合模式,更容易查看国家边界以及每个省的地形类型和控制者。这是专门用于陆地作战的地图模式,因为它用于跟踪战争的进展,创建和执行作战计划以及向部队下达命令。
F2 Strategic Navy map mode button.png 海军战略地图模式 单击“海军战略地图模式”按钮或按 F2 以查看显示的海军战略区域并为您具有海军优势(绿色),均势(黄色)或劣势(红色)的区域着色。当光标停在某海军区域时,该海军区域的海军基地将更加突出显示,并通过提示界面显示更多详细信息。这是显示补给运输航线的三种地图模式之一(其他两种是“补给区域地图模式”和“战略资源地图模式”)。最后,该地图模式会在您的海军舰队执行任务的所有海域中添加小型任务图标。
F3 Strategic Air map mode button.png 空军战略地图模式 单击“空军战略地图模式”按钮或按 F3 以查看显示的空军战略区域并为您具有空中优势(绿色),均势(黄色)或劣势(红色)的区域着色。当光标停在某空中区域时,该空中区域的空军基地将更加突出显示,并通过提示界面显示更多详细信息。最后,该地图模式会在您的空军联队执行任务的所有空中区域显示任务图标。
F4 Supply Areas map mode button.png 补给区域地图模式 单击“补给区域地图模式”按钮或按F4 以查看显示的所有补给区域(所有地区的补给状态)并会根据您在该区域补给量的充足与否而为该区域着色。将光标悬停在每个区域的中心地带时将显示补给路线,并通过提示界面显示更多详细信息,这些提示可显示问题区域和运输瓶颈。这是显示您的补给运输航线的第二种地图模式(其他两种是“海军战略地图模式”和“战略资源地图模式”)。
F5 Terrain map mode button.png 地形地图模式 单击“地形地图模式”按钮或按 F5 以查看将地形简化为不同颜色颜色的地图模式。
F6 Resistance map mode button.png 抵抗地图模式 Click the Resistance map mode 单击“抵抗地图模式”按钮或按 F6 以查看抵抗地图模式,该地图根据当前抵抗力量阈值不同着色,并提供更详细的占领区信息。
F7 Compliance map mode button.png 顺从度地图模式 单击“顺从度地图模式”按钮或按 F7 以查看顺从度地图模式,该地图根据当前顺从度阈值不同着色,并提供更详细的占领区信息。
F8 Resource map mode button.png 战略资源地图模式 单击“战略资源地图模式”按钮或按 F8 以查看战略资源地图模式,该地图模式按地区和显示世界上所有可用战略资源(包括工厂生产的合成资源;甚至在其他国家内)的数量。这是显示补给运输航线的第三种地图模式(其他为“海军战略地图模式”和“补给区域地图模式”)。
F9 Infrastructure map mode button.png 基础设施地图模式 单击“基础设施地图模式”按钮或按 F9 以查看每个地区的基础设施等级的地图模式。
F10 Factions map mode button.png 阵营地图模式 单击“阵营地图模式”按钮或按 F10 以查看阵营地图模式。该地图模式显示阵营名称并通过其当前阵营的隶属关系为世界各国着色。
None States map mode button.png 地区地图模式 单击“地区地图模式”按钮以查看地区地图模式。该地图模式根据所有地区的类型为地区着色,基于此解锁每个地区的建筑槽位的起始数量。解锁的建筑槽位数量不会改变,但是可以通过科研或国策树解锁增加建筑槽位的数量。
None Diplomacy map mode button.png 外交地图模式 单击“外交地图模式”按钮以查看外交地图模式。该地图模式根据世界上每个国家对当前选定国家的关系为它们上色(通过右键单击来选定国家;确保当前未选择任何军事单位)。
绿色表示当前选定国家所控制/拥有的地区。
蓝色表示与当前选定国家属于同一阵营的国家。
灰色表示与当前选定国家“中立”关系的国家。
橙色表示与当前选定国家“敌对”关系的国家。
红色表示与当前选定国家处于交战状态的国家。
None Players map mode button.png 玩家地图模式 单击“玩家地图模式”按钮以查看哪个国家由哪个玩家控制的地图模式。
None Population map mode button.png 人口地图模式 单击“人口地图模式”按钮以查看每个地区的人口
None Ideology map mode button.png 意识形态地图模式 单击“意识形态地图模式”按钮以查看每个国家的意识形态的地图模式。
蓝色表示民主主义;
棕色表示法西斯主义;
红色表示共产主义;
灰色表示中立国家。
M Unit counters toggle.png Unit Counters Click the Unit Counters button or press M to toggle the display of All unit counters or just the Player's unit counters on the map.
, Unit color toggle.png Counter Colors Click the Unit Color button or press , to toggle the color of allied counters to be country colors or Friendly/Neutral/Enemy colors.
. Battle plans (allied) toggle.png 盟军作战计划 单击“盟军作战计划”按钮或按 . ,以打开或关闭与您同一阵营的盟军作战计划的显示。
N Day night toggle.png 白天/夜晚 单击“白天/夜晚”按钮或按 N 以打开或关闭白天/夜晚地图叠加层。
None Fog of war toggle.png 战争迷雾 单击“战争迷雾”按钮以打开或关闭遮挡地形的迷雾云。
None Radars toggle.png 雷达 单击“雷达”按钮以打开或关闭雷达的探测范围。

陆军快捷键

键位 操作 描述
O Division Overview.png Division Overview The O key O opens the army Division Overview, also accessible with the button at the top right of the screen.
Ctrl + number Assign an Army or Divisions to a number Left click on an Army to select it or left click while holding Shift ⇧Shift to select multiple Divisions. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting an army or combination of Divisions. Tip: pressing a number hotkey twice will center the map on your assigned unit(s).

作战计划快捷键

Battleplanwindow.png

这些快捷键专门用于给你的陆军单位下达命令。它们只有在你从单个军队里选中单位并且作战计划界面可见时才有效。 (请参见右图)

键位 命令 描述
K Exercise transparent.png 演习 Clicking the Exercise button or pressing the K key K will tell all of the divisions in the command to commence the exercise order. This order cancels any battleplans but not existing movement orders. Exercising troops have very low Organization, so should be kept out of combat. Reference Exercise for more detail.
Shift + K Exercise until trained transparent.png 演习到训练完成 Using ⇧Shift+K (or ⇧Shift+LMB) lets troops train until the reach the regular experience level and then stop on an individual basis.
None Naval Invasion deselected.png 海军入侵 Clicking the Naval Invasion button after selecting your divisions will highlight all potential launch ports as a turquoise diagonal stripe pattern. After clicking on the desired launch port, it will become a highlighted blue diagonal stripe pattern. Then right click on a highlighted green diagonal stripe pattern coastal province that you wish to invade. The highlighted green diagonal stripe pattern coastal province will turn to a highlighted orange diagonal stripe pattern if done correctly. Once the plan is activated, the invasion will begin to prepare and reserve convoys from your country's pool. Reference Naval Invasion for more detail.
None Paradrop deselected.png 伞兵指令 Clicking the Paratroop Order button, after selecting your paratroop divisions, will highlight all potential "takeoff point" air bases as a turquoise diagonal stripe pattern (if transport planes are based there) or as a yellow diagonal stripe pattern (if no transport planes are based there). After clicking on the desired "takeoff point" air base (requires transport planes in that base), it will become a highlighted blue diagonal stripe pattern. Then right click on a highlighted green diagonal stripe pattern land province that you wish to designate as the drop location. The highlighted green diagonal stripe pattern land province will turn to a highlighted orange diagonal stripe pattern if done correctly. Once the plan is activated, the plan will be carried out provided that you have at least 70% air superiority and sufficient transport planes. Reference Paradrop and Air Superiority for more detail.
Z Front Line deselected.png 前线 After going into this mode by clicking the Front Line button or pressing the Z key Z, left click a border with another country to place a front for the selected units along the entire border with that country. Alternatively, you can right click and drag to customize the size of the front line. Note: It is not currently possible to right click and drag a front line across borders with multiple nations unless you are at war. Reference Front Line for more detail.
X Offensive Line deselected.png 进攻线 Can only be used with an army that has at least one Front Line already created. After activating by clicking the Offensive Line button or pressing the X key X, right click and drag to form the line you want your troops to advance to. While holding down right click, hit Tab ⇆Tab to cycle through the possible "starting points" for the arrow. This allows you to create intricate multi-step battleplans. Reference Offensive Line for more detail.
Shift + X Spearhead deselected.png 穿插命令 Can only be used with an army that has at least one Front Line already created. After activating by clicking the Spearhead button or pressing the Shift + X key ⇧ShiftX, right click and drag to draw the spearhead line. Compared to the Offensive Line, the Spearhead will aggressively try to take all provinces that were there when the order was first painted. Spearheads are preferred when you need to do overlapping encirclements, cutting off the enemy, or for more controlled, smaller thrusts into enemy territory. Spearheads tend to be narrow thrusts that can be especially useful for armored divisions. Reference Spearhead for more detail. Note: The Spearhead Order Spearhead deselected.png is only available with the Together for Victory expansion Together for Victory icon.png.
C Fallback line deselected.png 防御线 Click the Fallback Line button or press the C key C, then right click and drag to create a defensive line anywhere (not just on a border). This allows you to station divisions in specific provinces or along a specific set of terrain (like a river). Reference Fallback Line for more detail.
V Garrison Area deselected.png 区域防卫 Click the Garrison Area button or press the V key V to activate this mode, then select the states for your army to be stationed in. When you are done assigning, click the Garrison Area button or hit V V again to exit this mode. The selected divisions will spread out among the states and occupy cities, airbases, and naval bases. This is generally best used for guarding coastlines or important points in rear areas vs paradrops. Note that unlike other orders, if a Garrison order is assigned to any part of an army, the rest of the army cannot be assigned any other order without first removing the garrison order. It is an exclusive order. Therefore, an army with a garrison order should only include units that will be assigned to that order. Adding any new units to the army automatically has them join the garrison order. Reference Garrison Area for more detail.
Ctrl Divisions assignment mode deselected.png 分配陆军师模式 Click the Divisions Assignment Mode button or while holding control ^Ctrl, left click on a battle plan to assign the currently selected units to that plan. Alternatively, you can right click on any battleplan while holding control ^Ctrl to select all units currently assigned to that plan.
Ctrl + H Unassign Divisions.png 取消分配陆军师模式 Clicking the Unassign Divisions Mode button, or while holding control and the H key ^Ctrl H, will unassign the currently selected divisions from their orders.
Alt Edit mode deselected.png 编辑模式 Click the Edit Mode button or while holding Alt alt, you can edit existing battleplans. Alt alt + right click and drag alters the length and shape of front lines, offensive lines, and fallback lines. Alt alt + Left Click alters offensive arrows to bend or change their origin point (can even change the origin point to the end of another offensive line).
Del Delete Order deselected.png 删除命令 Clicking the Delete Order button or pressing the Delete key Delete allows you to selectively remove individual battleplans assigned to the current army. Right-clicking the Delete Order button will delete all orders of the currently selected army.

师级管理快捷键

只有当你选中了陆军师单位时,这些快捷键才有效。

键位 操作 描述
None Disband All Selected Units.png 解散所有陆军师 Click the Disband All Selected Units button to disband the selected units. This action will return the division manpower to the recruitable population pool and will return the division equipment to the stockpile. Caution: Disbanding surrounded (encircled) units will permanently eliminate the manpower and permanently destroy the equipment.
None Unassign Units.png 取消分配陆军师 Click the Unassign Units button to remove the selected divisions from the army. Note that this action preserves the divisions for reassignment to a new or different army.
None Consolidate.png Consolidate Click the Consolidate button to merge the selected divisions into one unit. This action can be used to take multiple understrength, damaged divisions and create stronger, full strength divisions with no loss of experience. The excess manpower is returned to the recruitable population pool and the excess equipment is returned to the stockpile. Note that this action can only be performed on divisions having the same template.
None Change Division Template.png 切换陆军师编制 Click the Change Division Template button to change the selected divisions to a different template from a pull-down menu. Reference Division designer.
S Select half.png 选择一半 Click the Select Half button or press the S key S to deselect half of the currently selected units as evenly as possible, but does not remove them from an army to which they belong. Press multiple times to continue to split the selection in half (round up). Can be used to select a single unit from a stack. For example: Select a stack of 9 infantry, hit Select Half once (deselects 4, leaving 5 selected). Hit Select Half again (deselects 2, leaving 3 selected). Hit Select Half again (deselects 1, leaving two selected). Hit Select Half a 4th time and there remains only 1 unit selected. Attempting to Select Half of a single unit results in no action. This can be used to quickly grab a stack, hit S 5 or 6 times to get a single unit very quickly and send it on a new mission.
H Hold Order.png 停止 Click the Hold button or press the H key H to order a unit to hold position, effectively canceling any move or attack orders currently assigned to the unit. This will not cancel their assignment to a front line, so if a hold order is given to a unit which is currently being moved due to a battleplan, it will hold only for a moment before immediately resuming their part in the battleplan. See next section.
B Strategic redeployment.png 战略转移 Click the Strategic Redeployment button or press the B key B before giving divisions a movement command, this will tell the divisions to utilize the strategic redeployment command meaning they will move at a speed of 10 km/h + up to 10 km/h extra, depending on the state's infrastructure.
Ctrl + B Strategic redeployment.png Toggle Strategic Redeployment Clicking the Strategic Redeployment button or by pressing CTRL B CTRL B after giving divisions a movement command will toggle on/off the strategic redeployment command.
Shift Waypoint Like many other strategy games, holding shift ⇧Shift while right clicking sets a series of waypoints for selected units. They will choose the best path to get to each waypoint in succession. This allows units to navigate around problem areas like enemies, bad terrain, or low supply zones. Note: View the full route to check for hazards on the way.
Ctrl Support Attack With a unit selected, hold down control ^Ctrl and right click on an existing battle to "support" that battle. Supporting a battle will allow the unit to participate in the battle, but it will *not* leave its province and enter the battle hex upon conclusion. This can be very valuable to preserve the integrity of the front line.
Ctrl + H Remove from Assigned Battleplan This key combination ^Ctrl H removes the currently selected divisions from their current battleplan without removing them from their current army. This is the only known way to remove multiple divisions from an assigned battleplan without giving them a new battleplan. When they are removed, they become independent divisions within the army that can be given direct orders separately , or assigned to another battleplan. Note that this will not work for units that are part of an army that has any garrison order.

海军快捷键

键位 操作 描述
Ctrl + number Assign a Task Force(s) to a number Left click on a Task Force to select it or left click while holding Shift ⇧Shift to select multiple Task Forces. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting a Task Force or combination of Task Forces. Tip: pressing a number hotkey twice will center the map on your assigned unit(s).
P Navy Overview.png Navy Overview The P key P opens the Navy Overview, also accessible with the button at the top right of the screen.
D Split.png Split Splits/Divides the selected task force into two task forces.
S Select half.png 选择一半 Selects half of the currently selected naval units. It tries to keep an equal number of each type of vessel in each new task force.
G Merge.png 合并特遣舰队 Merges the selected task forces into one task force. If the ships are not in the same province, then they will find a path to each other to merge.
K Naval Exercises.png 海军演习 Orders a task force to perform exercises in the region adjacent to the closest naval base. Ship crews within the task force gain ship experience while the country gains navy experience, but it costs fuel and can cause ship damage. Notes:
1. Ship crews will not gain experience beyond Regular level
2. The task force will continue to exercise until halted manually.
Shift + K Naval exercises until trained.png 海军演习到训练完成 Enables Naval Exercises until all ships in a task force are fully trained to Regular level, at which time the task force automatically stops exercising and returns to its naval base.
H Hold Mission.png Hold Cancels the current task force mission and moves the task force to the closest port.
Ctrl + H Hold Mission.png Hold Cancels the current task force mission and causes the task force to stay put.
Notes:
1. Capital ships on Hold in a sea province neighboring a land battle will help out with shore bombardment.
2. Carriers on Hold while at sea will be able to use their airwings for standard air missions.
Z Patrol.png 巡逻 Order a task force to patrol the selected regions with the primary purpose of spotting enemy fleets.
X Strike Force.png 打击舰队 Order a task force to wait at the closest naval base until a patrol task force spots an enemy task force, then the strike force will move to intercept it.
C Convoy Raiding.png 袭击运输船 Order a task force to raid enemy convoys in the selected regions.
V Convoy Escort.png 保护运输船 Order a task force to escort convoys in the selected regions to protect them against enemies.
B Minelaying.png 布置水雷 Order a task force to lay sea mines in the selected regions.
Shift + B Minesweeping.png Minesweeping Order a task force to search and neutralize enemy sea mines in the selected regions.
A Naval Invasion Support.png 海军入侵支援 Order ships to escort naval invasions and support them with shore bombardment.

空军快捷键

键位 操作 描述
Ctrl + number Assign an Air Wing(s) to a number Left click on an Air Wing to select it or left click while holding Shift ⇧Shift to select multiple Air Wings. Then, while holding down the Ctrl ^Ctrl key, press a number key 1, 2, 3, 4, 5, 6, 7, 8, 9, 0. This process assigns the pressed number as a hotkey for quickly selecting an Air Wing or combination of Air Wings. Tip: pressing a number hotkey twice will center the map on your assigned unit(s).
L Air Forces.png Airforce Overview The L key L opens the Airforce Overview, also accessible with the button at the top right of the screen.
F Duplicate air wing.png 复制 Duplicate selected air wings for all where this is possible.
D Split.png 分开 Splits/Divides the selected air wings in two.
G Merge.png 合并空军联队 Merges two or more selected wings into one wing. Note: each wing can hold up to a maximum of 1000 planes.
O Reorganize.png Reorganize Opens reorganize option to reorganize your wings and change reinforcement rules.
A Air select all.png 选择/取消选择 Selects/Deselects all of the air wings in a given airfield or carrier.
S Select half.png 选择一半 Selects half of the currently selected air wings.
H Hold Order.png 停止 Holds selected air wings.
N New Wing.png 新建空军联队 Opens new wing option to add to the selected airfield or carrier.
K Pilot Exercises Mission transparent.png 飞行员演习 Gains experience for selected air wing in addition to air experience, but costs fuel and increases risk of accidents.
Shift + K Pilot exercises until trained transparent.png Pilot Exercises until trained Enables pilot exercises until air wing is fully trained.
Z Air Superiority Mission transparent.png Air Superiority Mission Orders selected air wings to conduct an air superiority mission.
X Close Air Support Mission transparent.png Close Air Support Mission Orders selected air wings to conduct a close air support mission .
C Interception Mission transparent.png Interception Mission Orders selected air wings to conduct an interception mission.
V Strategic Bombing Mission transparent.png Strategic Bombing Mission Orders selected air wings to conduct a strategic bombing mission.
B Naval Strike Mission transparent.png Naval Strike Mission Orders selected air wings to conduct a naval strike mission.
J Port Strike Mission transparent.png Port Strike Mission Orders selected air wings to conduct a port strike mission.
Ctrl + B Kamikaze Strike Mission transparent.png Kamikaze Strike Mission Orders selected air wings to conduct a kamikaze strike mission.